linklayer
mainly questions/comments and maybe bug with dfu?
couple things:
-
not sure if the video is current or not (since it shows flashing a .bin not .hex?) but i still can't successfully flash the super.hex file and have had problems flashing the bootloader/softdevice etc as well even though it says it uploaded - my blekey that i tested on is stuck in DFU mode now so i think documentation needs to be updated for the flashing via android instructions.
-
what awg cable is recommended for the punchdown block? ive tried many and ended up using stranded cable without the rubber and thats the only way i could punchdown secure enough to stay in place (pulled cable from an old cpu fan i think)
-
how do we know what version of the firmware is running on the BLEKEY?
-
is there any way to change the output/information from blekey.py? for example i think it collects more info and should be able to give more detailed information? i.e https://github.com/linklayer/BLEKey/blob/891a0d8d0b331b1cbdbdea81511dd328d4f16b5d/wiegand.c#L204
-
is there any way to save card data on the blekey till manually removed as well ? think i noticed a bug if the data1/data2/and/or ground are not secure enough you can see the ble device but can't access ble characteristics (not sure exactly what causes this but i think one of the cables not being secure or shorted with another is the cause)
-
is 1.2 the most recent hw version? any plans for a newer ver?
thank you!
