ethernet goes off in hole ssid area label:bug

[der-nele]

not sure were to put this problem i admin a libremesh in leipzig whis bmx7, batman and OpenWrt 19.07.6

the bug comes ca. all second month /also with older versions of OpenWrt

all ethernet connections in the lokal-mesh break down. and do not come back by it one

the mesh is bild up out of ca 10x tplink 3600 and one loco-m (behinde the setra-5ghz are more ssid's) 8 from 11 nodes are connected via lan

see map downstairs ______=kabel/mesh &&&= wifi/mesh

my problem is that the routers are isolatet if the ethernet gos down and i have to shout down the hole area (40 peaple) from electricity ore walk to all routers and make on/off

my question is whitch things i have to lock up if it happend again. or are there other things i can try

thanks for interest nele ps: sorry for the bad spelling. is not my best skill.

[der-nele]

the map and 2 logreads

2logreads.txt

[der-nele]

it happend again. / i think there is a connection between bmx7 and a split of one ssid. we have often that the fuse from elektricety came. so sometime a node in the middle turn of. i think this can trigger the bug. we had this also when we did update with a new communety file =(new ssid) as we update one node in the middle before the other notes were new. the same happens. wifi mesh= yes but no eternet at any node in the ssid ethernet-bug.txt

feel free to correct or ask questions for better understanding...

[spiccinini]

Hi! Sorry for the delay, I've never used bmx7 myself. Do you think it is a bmx7 issue? Maybe it would be a good idea to report it to https://github.com/bmx-routing/bmx7/issues

Or do you think it is a libremesh issue?

I don't understand exactly, the issue is that when the ethernet goes down and then back online the mesh is split and does not rejoin and you have to unplug the ethernet cable and replug it manualy?

[der-nele]

jes can be bmx7

the ethernet interfaces fron every node are of at the same time and do not com back. althow no ping ff02::1%br-lan (just if there is a wifi-mesh neighbour)

[ilario]

@der-nele is this issue still happening? We are planning to not support BMX7 in the next release (see #977), as we feel that its support in LibreMesh is not active. Do you agree or it is working well for you?

[der-nele]

@ilario yes it still happens and i do not now how. but... for me it would be nice to have one more update with bmx7 just to not be forced for such and learn about an other firmware.

[der-nele]

i already call out for helb to find an other firmware. if you now some how is in Leipzig how like big challenge. and knows about libremesh "standard" or have an other stable firmware let me know.