libdriver/bmp390: BMP390 full function driver library for general MC...

LibDriver BMP390

The BMP390 is a very small, low-power and low-noise 24-bit absolute barometric pressure sensor. The digital, high-performance sensor is ideally suited for a wide range of altitude tracking applications. This new BMP390 pressure sensor offers outstanding design flexibility, providing a single package solution that customers can easily integrate into a multitude of existing and upcoming devices such as smartphones, GPS modules, wearables, hearables and drones.

LibDriver BMP390 is a full function driver of BMP390 launched by LibDriver.It provides continuous reading of pressure and temperature, single reading of pressure and temperature, interrupt reading, FIFO acquisition and other functions. LibDriver is MISRA compliant.

Instruction
Install
Usage
- example basic
- example shot
- example interrupt
- example fifo
Document
Contributing
License
Contact Us

Instruction

/src includes LibDriver BMP390 source files.

/interface includes LibDriver BMP390 IIC, SPI platform independent template.

/test includes LibDriver BMP390 driver test code and this code can test the chip necessary function simply.

/example includes LibDriver BMP390 sample code.

/doc includes LibDriver BMP390 offline document.

/datasheet includes BMP390 datasheet.

/project includes the common Linux and MCU development board sample code. All projects use the shell script to debug the driver and the detail instruction can be found in each project's README.md.

/misra includes the LibDriver MISRA code scanning results.

Install

Reference /interface IIC, SPI platform independent template and finish your platform IIC, SPI driver.

Add the /src directory, the interface driver for your platform, and your own drivers to your project, if you want to use the default example drivers, add the /example directory to your project.

Usage

You can refer to the examples in the /example directory to complete your own driver. If you want to use the default programming examples, here's how to use them.

example basic

#include "driver_bmp390_basic.h"

uint8_t res;
uint8_t i;
float temperature_c;
float pressure_pa;

res = bmp390_basic_init(BMP390_INTERFACE_IIC, BMP390_ADDRESS_ADO_LOW);
if (res != 0)
{
    return 1;
}

...

for (i = 0; i < 3; i++)
{
    bmp390_interface_delay_ms(1000);
    res = bmp390_basic_read((float *)&temperature_c, (float *)&pressure_pa);
    if (res != 0)
    {
        (void)bmp390_basic_deinit();

        return 1;
    }
    bmp390_interface_debug_print("bmp390: temperature is %0.2fC.\n", temperature_c);
    bmp390_interface_debug_print("bmp390: pressure is %0.2fPa.\n", pressure_pa);

    ...
        
}

...

(void)bmp390_basic_deinit();

return 0;

example shot

#include "driver_bmp390_shot.h"

uint8_t res;
uint8_t i;
float temperature_c;
float pressure_pa;

res = bmp390_shot_init(BMP390_INTERFACE_IIC, BMP390_ADDRESS_ADO_LOW);
if (res != 0)
{
    return 1;
}

...

for (i = 0; i < 3; i++)
{
    bmp390_interface_delay_ms(1000);
    res = bmp390_shot_read((float *)&temperature_c, (float *)&pressure_pa);
    if (res != 0)
    {
        (void)bmp390_shot_deinit();

        return 1;
    }
    bmp390_interface_debug_print("bmp390: temperature is %0.2fC.\n", temperature_c);
    bmp390_interface_debug_print("bmp390: pressure is %0.2fPa.\n", pressure_pa);
    
    ...
    
}

...

(void)bmp390_shot_deinit();

return 0;

example interrupt

#include "driver_bmp390_interrupt.h"

uint8_t res;
uint16_t i, timeout;
uint8_t gs_data_ready_flag;
float gs_temperature_c;
float gs_pressure_pa;

void bmp390_interrupt_receive_callback(uint8_t type)
{
    switch (type)
    {
        case BMP390_INTERRUPT_STATUS_FIFO_WATERMARK :
        {
            break;
        }
        case BMP390_INTERRUPT_STATUS_FIFO_FULL :
        {
            break;
        }
        case BMP390_INTERRUPT_STATUS_DATA_READY :
        {
            /* read temperature pressure */
            if (bmp390_interrupt_read((float *)&gs_temperature_c, (float *)&gs_pressure_pa) != 0)
            {
                bmp390_interface_debug_print("bmp390: read temperature and pressure failed.\n");
           
                return;
            }
            gs_data_ready_flag  = 1;
            
            break;
        }
        default :
        {
            break;
        }
    }
}

res = gpio_interrupt_init();
if (res != 0)
{
    return 1;
}
res = bmp390_interrupt_init(BMP390_INTERFACE_IIC, BMP390_ADDRESS_ADO_LOW, bmp390_interrupt_receive_callback);
if (res != 0)
{
    (void)gpio_interrupt_deinit();

    return 1;
}

...

gs_data_ready_flag = 0;
timeout = 5000;
for (i = 0; i < 3; i++)
{
    while (timeout != 0)
    {
        bmp390_interface_delay_ms(100);
        timeout--;
        if (gs_data_ready_flag != 0)
        {
            break;
        }
        if (timeout == 0)
        {
            (void)gpio_interrupt_deinit();
            (void)bmp390_interrupt_deinit();

            return 1;
        }
    }
    gs_data_ready_flag = 0;
    timeout = 5000;
    bmp390_interface_debug_print("bmp390: temperature is %0.2fC.\n", gs_temperature_c);
    bmp390_interface_debug_print("bmp390: pressure is %0.2fPa.\n", gs_pressure_pa);
    
    ...
    
}

...

(void)gpio_interrupt_deinit();
(void)bmp390_interrupt_deinit();

return 0;

example fifo

#include "driver_bmp390_fifo.h"

uint8_t gs_fifo_full_flag;
uint8_t gs_fifo_watermark_flag;
uint16_t i, timeout;
uint8_t gs_buf[512];
bmp390_frame_t gs_frame[256];

void bmp390_fifo_receive_callback(uint8_t type)
{
    switch (type)
    {
        case BMP390_INTERRUPT_STATUS_FIFO_WATERMARK :
        {
            uint8_t res;
            uint16_t len;
            uint16_t i, frame_len;
            
            len = 512;
            frame_len = 256;
            res = bmp390_fifo_read(gs_buf, len, (bmp390_frame_t *)gs_frame, (uint16_t *)&frame_len);
            if (res != 0)
            {
                bmp390_interface_debug_print("bmp390: fifo read failed.\n");
                
                return;
            }
            for (i = 0; i < frame_len; i++)
            {
                if (gs_frame[i].type == BMP390_FRAME_TYPE_TEMPERATURE)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: temperature is %0.2fC.\n", gs_frame[i].data);
                }
                else if (gs_frame[i].type == BMP390_FRAME_TYPE_PRESSURE)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: pressure is %0.2fPa.\n", gs_frame[i].data);
                }
                else if (gs_frame[i].type == BMP390_FRAME_TYPE_SENSORTIME)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: sensortime is %d.\n", gs_frame[i].raw);
                }
                else
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: unknow type.\n");
                }
            }
            gs_fifo_watermark_flag = 1;
            
            break;
        }
        case BMP390_INTERRUPT_STATUS_FIFO_FULL :
        {
            uint8_t res;
            uint16_t len;
            uint16_t i, frame_len;
            
            len = 512;
            frame_len = 256;
            res = bmp390_fifo_read(gs_buf, len, (bmp390_frame_t *)gs_frame, (uint16_t *)&frame_len);
            if (res != 0)
            {
                bmp390_interface_debug_print("bmp390: fifo read failed.\n");
                
                return;
            }
            for (i = 0; i < frame_len; i++)
            {
                if (gs_frame[i].type == BMP390_FRAME_TYPE_TEMPERATURE)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: temperature is %0.2fC.\n", gs_frame[i].data);
                }
                else if (gs_frame[i].type == BMP390_FRAME_TYPE_PRESSURE)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: pressure is %0.2fPa.\n", gs_frame[i].data);
                }
                else if (gs_frame[i].type == BMP390_FRAME_TYPE_SENSORTIME)
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: sensortime is %d.\n", gs_frame[i].raw);
                }
                else
                {
                    bmp390_interface_debug_print("bmp390: fifo %d/%d.\n", i+1, frame_len);
                    bmp390_interface_debug_print("bmp390: unknow type.\n");
                }
            }
            gs_fifo_full_flag = 1;
            
            break;
        }
        case BMP390_INTERRUPT_STATUS_DATA_READY :
        {
            break;
        }
        default :
        {
            break;
        }
    }
}

res = gpio_interrupt_init();
if (res != 0)
{
    return 1;
}
res = bmp390_fifo_init(BMP390_INTERFACE_IIC, BMP390_ADDRESS_ADO_LOW, bmp390_fifo_receive_callback);
if (res != 0)
{
    (void)gpio_interrupt_deinit();

    return 1;
}

...

gs_fifo_watermark_flag = 0;
gs_fifo_full_flag = 0;
timeout = 5000;
for (i = 0; i < 3; i++)
{
    while (timeout != 0)
    {
        bmp390_interface_delay_ms(100);
        timeout--;
        if ((gs_fifo_watermark_flag != 0) || (gs_fifo_full_flag != 0))
        {
            break;
        }
        if (timeout == 0)
        {
            (void)gpio_interrupt_deinit();
            (void)bmp390_fifo_deinit();

            return 1;
        }
    }
    gs_fifo_watermark_flag = 0;
    gs_fifo_full_flag = 0;
    timeout = 5000;
    
    ...
    
}
(void)gpio_interrupt_deinit();
(void)bmp390_fifo_deinit();

...

return 0;

Document

Online documents: https://www.libdriver.com/docs/bmp390/index.html.

Offline documents: /doc/html/index.html.

Contributing

Please refer to CONTRIBUTING.md.

License

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy

of this software and associated documentation files (the "Software"), to deal

in the Software without restriction, including without limitation the rights

to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

copies of the Software, and to permit persons to whom the Software is

furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all

copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Contact Us

Please sent an e-mail to [email protected].

bmp390
bmp390 copied to clipboard

Metadata