lexmark3200

I uncheck the Force 40MHz and now, Lenovo connect with 144/144Mbps and the test speed is about 100/120 Mbps. Sometimes is less.

> If 5GHz is saturated (unlikely) you may try 160->80->40 with auto channel selection. Note the 5min delay on any change. No, it is free, only my Meraki is configured...

ok, it's done ;-) on 5GHz it's not only my network, Netgear found another two. One on 40ch and the second on 112ch. On 2.4Ghz is my network on 6ch,...

> Remember - same "lan" same security parameters. Clients will roam when one antenna becomes weak without any roaming protocol. I udenrstand that, I was tested that on my Meraki's...

I'm sorry my mistake. I corrected post. > That is meraki term for steering protocols. We didn't understanding. My meraki have flashed openWRT too ;-) the last available version. Fast...

> as long as AP name is same ESSIDs are the same, or AP name you mean hostname AP?

Hi. I h've flashed the 22.03.3 firmware, and the wifi speed on 2.4GHz is very slow, after reboot, the radio is not working: I checked the system log: Mon Jan...

I flashed older ver 19.07, now is working fine. On 22.03 I can feel the connections between AP and clients take longer then 19.7 ver. Win 10 when connect to...

> Bisecting - 21.02 ? Do you ask me if I trayed 21.02 ver? I flashed 21.02.5 (the last of 21.02) Yes, the problem was with radio too. Not recognize...

Ok. OpenWRT 19.07.10: * if I check Force 40MHz: the connection speed is 300/300 the measured (speed test on my LAN - librespeed) - 30-40 / 230 Mb (DW/UP) *...