New: Panel animated extended mode

[s520]

This PR add "Panel animated extended mode". This mode add automatically touch zone at panel.animated. Please add the following to the touch section of option file. panelanimatedextended = true If there is no problem, I will make it configurable by GUI.

[leezer3]

Will take a look, bit probably not until tomorrow evening now :)

[s520]

Oh, I forgot to check whether it is a single handle car. I fixed this to work even with a single handle car.

[leezer3]

Unfortunately, that's not quite as good :(

I suspect the zones I can't find are probably stuck somewhere at the center of rotation? Perhaps we need the zone to traverse the entire height of the object?

Some test subjects: UK 323 3D Cab http://railsimroutes.net/x-city_south/index.php

Reverser is reasonable. Power handle isn't as good. The click zone is too far down.

D1015: http://www.bvecornwall.co.uk/wordpress/br-class-52-western/ No touch zones findable at all. It's creating them in what seems to be approximately the right place, but nothing appearing.

FMCB 3000 series: https://en.bvebarcelona.cat/downloads/trains/3000-series/ No touch zones findable again.

[s520]

After all it is necessary to add the size of the object? Is there any good way to do it?

[leezer3]

I'd guess so.

Don't know how much effort it's worth putting into it though- This could get complex very fast....

[s520]

What about putting a vehicle with no license problem on the main program? Of course it is for the touch compatible 3D cab.