Ludovic BOUÉ

> There's no way to specify the pins for the encoders. Try the Arduino example sketch and see which way the numbers go. @ssieb It works correctly with the Arduino...

> Yes. I see I invert the values and there's a comment that it was to make clockwise positive. Which way is positive with the arduino sketch? @ssieb I get...

There is a PR to add [Support for esp8684 (esp32-c2) #1203](https://github.com/platformio/platform-espressif32/pull/1203) but esp-idf and platform-espressif32.

@rimroot Thanks. I will check that too.

Could you update the Matter EFR32 Lock Example [README](https://github.com/project-chip/connectedhomeip/blob/master/examples/lock-app/silabs/README.md) too?

Just great. This is exactly what I was looking for. I have the same Novoferm model.

Hi @ti-mo, I couldn't get the serial port command to work. I get errors in the logs like the following ``` [13:27:56][E][tormatic.cover:291]: Reading remaining 1701984816 payload bytes of unknown type...

I have disabled logging on the serial port: ``` # Enable logging logger: level: DEBUG baud_rate: 0 logs: tormatic: DEBUG ``` I am getting more accurate messages this time: ```...

Here is what I am getting: ``` 15:40:20][D][uart_debug:114]: >>> 00:10:00:00:00:06:01:04:00:0A:00:01 [15:40:20][E][tormatic.cover:291]: Reading remaining 268435454 payload bytes of unknown type 0x601 [15:40:20][D][uart_debug:114]: > 00:11:00:00:00:06:01:04:00:0A:00:01 [15:40:20][E][tormatic.cover:267]: Header specifies payload size 4 but...

Here's the label on it. The order doesn't seem to be working at the moment.