check_nwc_health

check_nwc_health copied to clipboard

alcatel monitoring

2

Hi, Trying to monitor alcatel switch we receive no info, only OK no memory usage, status hardware, cpu load... ./check_nwc_health --hostname 192.168.2.243 --community public --mode uptime OK ./check_nwc_health --hostname 192.168.2.243...

trentasis

I am trying to get interface usage on interfaces but i do not want to view interfaces which are by default down or not yet configured. is there a way...

aiiqbal

Change Output in Verbose Mode

1

I really would like a change in the normal verbose mode. The first line should be the Plugin Command ``` OK/CRITICAL/WARNING/... the rest can be long text/verbose | plus perfdata...

dhoffend

Hi, Currently the disk-usage check says that it's unimplemented. Please add the following MIBs for the check: CheckPoint MIBs: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk90470 Disk entries: https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk90860#Common%20used%20SNMP%20OIDs%20-%20System%20counters%20-%20Disk The partition indexes are: 1: / (root)...

om617

Incorrect interface utilization with Cisco SG350

1

Using version 7.10.0.6 the interface usage calculations are wrong: ``` CRITICAL - interface GigabitEthernet13 (alias gi13) usage is in:0.85% (8.53bit/s) out:2645.52% (26455.20bit/s), interface GigabitEthernet14 (alias gi14) usage is in:3.00% (30.00bit/s)...

peterhoeg

Moin, nach einem Update der Firewalls auf FortiOS 5.4 stellte sich heraus, dass check_nwc_health das Interface nicht mehr erkannte und einen "Unknown - no Interfaces" anzeigt. Das "Problem" dabei ist,...

aendieh

Hi, I am using the latest check_nwc_health (which is great, thanks), but I can seem to see any graphs when I monitor individual interfaces for interface-health and interface-usage, as an...

nickjwest

Force10 MXL10/40 modes not implemented for this device

1

Hi, we have DELL Force10 MXL10/40 and would like to use your great check_nwc_health also for that switch because it works so good for our Juniper SRX and EX stuff....

ant0nwax

Add feature power usage

2

Hi, Can you add power usage on Cisco switch ? Thanks

hvad

Hi. I'm trying to measure the status of a Cisco Call Manager, using the hardware-health mode. I need to blacklist an interface which is supposed to be down: ``` [HRDEVICENETWORK_Classes::Cisco::CCM]...

gzalo