attempt to access beyond end of device

[andrei-trybukhouski]

data corruption with new formatted partition окт 09 22:26:26 homepc kernel: sdb5: rw=2049, want=3585370432, limit=102400000 окт 09 22:26:26 homepc kernel: attempt to access beyond end of device окт 09 22:26:26 homepc kernel: sdb5: rw=2049, want=3585373296, limit=102400000 окт 09 22:26:26 homepc kernel: io_callback: io error -5 block 1354872 action 4 prev_count 2 окт 09 22:26:26 homepc kernel: io_callback: io error -5 block 1368384 action 4 prev_count 1 окт 09 22:26:26 homepc kernel: EXT4-fs warning (device sdb5): ext4_end_bio:323: I/O error 10 writing to inode 657155 (offset 4096 size 83845 окт 09 22:26:26 homepc kernel: buffer_io_error: 1413 callbacks suppressed окт 09 22:26:26 homepc kernel: Buffer I/O error on device sdb5, logical block 169359 окт 09 22:26:26 homepc kernel: Buffer I/O error on device sdb5, logical block 169360 окт 09 22:26:26 homepc kernel: attempt to access beyond end of device there is 16Gb ssd partition and 50Gb home partition. kernel 5.2 amd64 command eio_cli create -d /dev/sdb5 -s /dev/sda4 -p lru -m wt -c sdb5_cache behavior is the same with wt or with ro. in the upstream it seems that similar error was fixed.

[lanconnected]

Could you please provide #parted -l /dev/sdb and #cat /proc/enhanceio/sdb5_cache/config? Thanks.

[andrei-trybukhouski]

I migrated to bcache, but it works noticeably worse. I will try now to reproduce the problem again at a new partition

[andrei-trybukhouski]

homepc cache0 # eio_cli create -d /dev/sdc3 -s /dev/sdd1 -p lru -m wt -c sdc3_cache 
Cache Name       : sdc3_cache
Source Device    : /dev/sdc3
SSD Device       : /dev/sdd1
Policy           : lru
Mode             : Write Through
Block Size       : 4096
Associativity    : 256
ENV{ID_SERIAL}=="Hitachi_HDS721050DLE630_MSK4215H12YV3G", ATTR{partition}=="3"
ENV{ID_SERIAL}=="SSD_16G_AA180315000003084962", ATTR{partition}=="1"
Cache created successfully

[ 8350.789997] enhanceio_lru: eio_lru_instance_init: created new instance of LRU
[ 8350.789998] enhanceio: Setting replacement policy to lru (2)
[ 8350.790425] Not enough sets to use small metadata
[ 8350.790437] enhanceio: Allocate 30086KB (8B per) mem for 3851008-entry cache (capacity:15101MB, associativity:256, block size:4096 bytes)

 copied firefox profile and rebooted = data corrupted

`  34.100728] EXT4-fs (sdd1): recovery complete
[   34.111625] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[   38.424073] EXT4-fs (sdd3): mounted filesystem with ordered data mode. Opts: (null)
[  107.884218] attempt to access beyond end of device
[  107.884223] sdd3: rw=524288, want=904109888, limit=819521536
[  107.896467] io_callback: io error -5 block 746855744 action 3 prev_count 0
[  199.265361] attempt to access beyond end of device
[  199.265370] sdd3: rw=1, want=944671984, limit=819521536
[  199.267912] io_callback: io error -5 block 787417600 action 4 prev_count 1
[  199.304742] io_callback: io error -5 block 630163456 action 4 prev_count 1
[  199.304876] io_callback: io error -5 block 472909312 action 4 prev_count 2
[  199.305066] io_callback: io error -5 block 315655168 action 4 prev_count 3
[  199.305311] io_callback: io error -5 block 158401024 action 4 prev_count 4
[  199.305598] io_callback: io error -5 block 1146880 action 4 prev_count 5
[  199.305966] EXT4-fs warning (device sdd3): ext4_end_bio:323: I/O error 10 writing to inode 23332290 (offset 0 size 8388608 starting block 143360)
`
`Модель: ATA SSD 16G (scsi)
Диск /dev/sdc: 15.8GB
Размер сектора (логич./физич.): 512B/512B
Таблица разделов: msdos
Флаги диска: 

Номер  Начало  Конец   Размер  Тип      Файловая система  Флаги
 1     1049kB  15.8GB  15.8GB  primary


Модель: ATA Hitachi HDS72105 (scsi)
Диск /dev/sdd: 500GB
Размер сектора (логич./физич.): 512B/4096B
Таблица разделов: msdos
Флаги диска: 

Номер  Начало  Конец   Размер  Тип      Файловая система  Флаги
 2     30.0GB  38.0GB  8000MB  primary  linux-swap(v1)
 1     38.0GB  80.5GB  42.5GB  primary  ext4              загрузочный
 3     80.5GB  500GB   420GB   primary  ext4
`
`homepc ~ # cat /proc/enhanceio/sdc3_cache/config 
src_name   /dev/sdd3
ssd_name   /dev/sdc1
src_size   819521536
ssd_size   3851008
set_size          256
block_size       4096
mode                3
eviction            2
num_sets        15043
num_blocks    3851008
metadata        large
state        normal
flags      0x00000020
`