Eduardo Spremolla

In my experience that happens for supply interference. Power the sensor with 5v. Add 100nF between 5v and Gnd as close to the sensor as possible. Lower the data pull...

Do not use 5V in the data pullup line, that may destroy the input pin. ESP do not allow 5v in the pins. El lun., 7 sept. 2020 a las...

That your specific device tolerate that not means it "is all right". Manufacturer specs say ESP and Raspberry Pi GPIO should not be exposed to 5V El mar., 8 sept....

Sorry but no. Look here. El mar., 8 sept. 2020 a las 8:29, vitotai () escribió: > ESP8266 is said, by the manufacturer, to be 5V tolerant. > > —...

1uF in data line is bad, will distort the pulses shape. As mutch as you stabilize the power supply the better. 100nF or 1uF are good as long as they...

Instead of a D1 you can use a ESP07 with external antena El sáb., 16 de mayo de 2020 12:48, vitotai escribió: > @vitotai maybe one more question. I don't...

It seems they are HUB40, I only find thid picture on a russian page. [  ](url)

El El mié, 1 de may. de 2019 a las 11:37, aafuni escribió: > I should also say that I am horrible at the programming side of things, > but...

Yes El jue., 2 may. 2019 a las 9:43, aafuni () escribió: > lalo-uy, you mean the wiki for the BrewPiLess? > > — > You are receiving this because...

Cans are aluminum, wont register on inductive sensor. Will need an optical one. El El lun, 12 de oct. de 2020 a la(s) 10:24, interstaller555 < [email protected]> escribió: > >...