Lakshantha Dissanayake

Hello @bigbearishappy, The following is the output you requested: ```sh pi@raspberrypi:~ $ lsmod Module Size Used by rfcomm 49152 4 cmac 16384 3 algif_hash 16384 1 aes_arm_bs 24576 2 crypto_simd...

Hello @bigbearishappy, I have tried with the latest code, but the issue is still there. This is when "reTerminal-bridge" is enabled. ```sh root@raspberrypi:/sys/class/leds# ls default-on mmc0 mmc0:: ``` ```sh pi@raspberrypi:~...

On a side note, my reTerminal has the "mcp23008" expansion chip and I have enabled it with "dtoverlay=reTerminal,addr=0x20,mcp23008" inside /boot/config.txt

Hello @bigbearishappy, Please revert this commit: https://github.com/Seeed-Studio/seeed-linux-dtoverlays/commit/5acdeabb8d572e9c84765644f2a56dc7c4488b8c I have added to FAQ until a fix is found: https://wiki.seeedstudio.com/reTerminal-FAQ/#q12-leds-and-buzzer-do-not-work-after-installing-reterminal-drivers Let's keep the issue open until it is fixed. Thank you

Hello everyone, The problem is that, LCD driver does not work well with the latest kernel 5.15. I have raised this issue and assigned our Software Enginner in charge of...

Hello everyone, reTerminal LCD is working fine now with the latest Bullseye (kernel 5.15) release: https://github.com/Seeed-Studio/seeed-linux-dtoverlays/pull/41 After the above PR, there was a new issue and it is also fixed...

@EverythingSmartHome Is everything working for you now? If yes, this PR can be closed. Thank you.

Hello, Could you please tell me your environment? - Hardware used - OS installed - And more info Thank you

Hello @SNEF-CBI @SNEF-CBI, I have tried it and it seems you need to install the compilation tools by separating into two as follows: ``` sudo apt install qtbase5-dev qtchooser qt5-qmake...

> Hi, > > I use Fresh reTerminal without any update (receive today) Hello, If you have fresh reTerminal, you do not need to install anything for Qt. Everything is...