K Wilson

In the stm32 reference manual for the **RCC->CFGR** register: ``` Bits 22:21 MCO1: Microcontroller clock output 1 Set and cleared by software. Clock source selection may generate glitches on MCO1....

STM32 Nodes should respond to sensor self test request from FC. Many sensors have a 'self-test' command and create an internal diagnostic report which could be evaluated or passed to...

SD card: Respond to FC reset logging request

1

STM32 nodes should respond to and act on request logging restart from fp=0 instead of end-of-data.

The current value is a stacked pair of equivalent capacitor value that is unpretty.

MAX2769 SPI interface not connected to GPIO with access to SPI module on STM32f4xx

5

This is a duplicate of avionics-cad repo. Issue 2. (Perhaps it should only have been entered here.) I have added mod wire proposals to the schematic for the v2 board.