nerf_pl
nerf_pl copied to clipboard
kwea123
Mesh for Dtu scan9
I followed all the steps from COLMAP notebook to Mesh extraction notebook, step by step. Everything worked but the mesh was not colored correctly, It was all black. You have extracted mesh for dtu scan9, it would be great if you could help me reproduce those results.
These were the parameters that I tuned.
xmin, xmax = -1, 1 # left/right range ymin, ymax = -1, 1 # forward/backward range zmin, zmax = -1, 1 # up/down range
sigma_threshold = 30
This is my coolorless mesh for dtu scan9.
This is what I get after fusing colors as a final mesh.
--use_vertex_normal, solved the issue but the final colored mesh is inverted for some reason.
This is DTU scan4. As you can see the mesh is inverted. what could be the issue here?
--use_vertex_normal, solved the issue but the final colored mesh is inverted for some reason.
This is DTU scan4. As you can see the mesh is inverted. what could be the issue here?
Also have the same problem, the mesh result is inverted (mirrored in x axis). Do you solve this issue?
