Steve Ward

Hi, sorry I can't offer any hints but reverting the firmware should work - there's absolutely no reason why it wouldn't. Sounds like something else has broken - something popped...

> If I was to use the “thread to shoulder” , how should I proceed? I’m using a nema34 stepper, Thanks You need to download the code from my (kwackers)...

> [kwackers](https://github.com/kwackers) Thank you for this. I am very excited to try it. I stopped using this interface and went with an import setup just to get this feature so...

> Yeah I hope this seriously gets considered for merge. This missing feature is why I went with a nanoels h2 instead. Quick question, why is stopping the spindle before...

> Honestly I have it a try on nanoels, and just leave it up to the closed loop stepper. The driver takes care of overspending and getting back into the...

One thing that did occur to me is if you don't stop the spindle then it'll move back to the start position and immediately start cutting the next pass of...

> @kwackers do you mind if I do a rebase of your work on top of @clough42 's default configuration in order to make it easier both for James to...

> Finally got it working! custom threads, angle position However when I use shoulder, as it retracts, I loose sinc with the thread. Shoulder set, start set. Nut engaged. anyone...

> Folks, pardon my annoyance, what's the latest status on this? I would love to have this functionality, but I don't want to lose all the fixes and updates in...

Hi blackfister, not sure why you would lose positing when you cut a thread - if you don't actually make the cut do you still lose position? Bear in mind...