希望启动多个kcp实例 做负载均衡 有解决办法吗

[JoveYu]

希望启动多个kcp实例 做负载均衡 有解决办法吗

[sqliuchang]

自己复制修改init脚本，然后启用就行了

[Ding-Kyoma]

@sqliuchang 能分享一下你修改后的init脚本么，我简单的改了一下开头的KCPTUN=kcptun 、 CONFIG_FOLDER=/var/etc/$KCPTUN 以及相应的配置，结果还是不能用

[sqliuchang]

#!/bin/sh /etc/rc.common
#
# Copyright 2016-2019 Xingwang Liao <[email protected]>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#    http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

START=99
USE_PROCD=1

KCP0=kcp0
CONFIG_FOLDER=/var/etc/$KCP0

if [ -r /usr/share/libubox/jshn.sh ]; then
	. /usr/share/libubox/jshn.sh
elif [ -r /lib/functions/jshn.sh ]; then
	. /lib/functions/jshn.sh
else
	logger -p daemon.err -t "$KCP0" \
		"Package required: jshn."
	exit 1
fi

_log() {
	local level="$1"
	local msg="$2"

	logger -p "daemon.${level}" -t "$KCP0" "$msg"
}

gen_client_config_file() {
	local config_file="$1"

	json_init
	json_add_string "remoteaddr" "${server_addr}:${server_port}"
	json_add_string "localaddr" "${listen_addr}:${listen_port}"

	add_configs() {
		local type="$1"; shift
		local k v

		for k in "$@"; do
			v="$(eval echo "\$$k")"

			if [ -n "$v" ]; then
				if [ "$type" = "string" ]; then
					json_add_string "$k" "$v"
				elif [ "$type" = "int" ]; then
					json_add_int "$k" "$v"
				elif [ "$type" = "boolean" ]; then
					if [ "$v" = "true" ]; then
						json_add_boolean "$k" "1"
					else
						json_add_boolean "$k" "0"
					fi
				fi
			fi
		done
	}

	add_configs "string" key crypt mode
	add_configs "int" conn autoexpire mtu sndwnd rcvwnd datashard parityshard dscp \
		nodelay interval resend nc sockbuf smuxver smuxbuf streambuf keepalive scavengettl snmpperiod
	add_configs "boolean" nocomp acknodelay quiet tcp

	if [ -n "$log_file" ]; then
		json_add_string "log" "$log_file"
	fi

	json_close_object

	json_dump -i >"$config_file"
}

add_iptables_rule() {
	local port="$1"

	iptables-restore --noflush <<-EOF 2>/dev/null
		*nat
		:KCP0 -
		-A KCP0 -p tcp --dport $port -j ACCEPT
		-A INPUT -p tcp -j KCP0
		COMMIT
	EOF
}

clear_iptables_rule() {
	iptables-save --counters | grep -vi "KCP0" | iptables-restore --counters
}

validate_config_section() {
	uci_validate_section "$KCP0" general "$1" \
		'server:uciname' \
		'client_file:string' \
		'daemon_user:string:root' \
		'enable_logging:bool:0' \
		'log_folder:directory:/var/log/kcp0'
}

validate_server_section() {
	uci_validate_section "$KCP0" servers "$1" \
		'server_addr:host' \
		'server_port:port:29900' \
		'listen_addr:host:0.0.0.0' \
		'listen_port:port:12948' \
		'key:string' \
		'crypt:string:aes' \
		'mode:or("normal","fast","fast2","fast3","manual"):fast' \
		'conn:min(1)' \
		'autoexpire:uinteger' \
		'scavengettl:min(-1)' \
		'mtu:range(64,9200)' \
		'sndwnd:min(1)' \
		'rcvwnd:min(1)' \
		'datashard:uinteger' \
		'parityshard:uinteger' \
		'dscp:uinteger' \
		'nocomp:or("true", "false")' \
		'quiet:or("true", "false")' \
		'tcp:or("true", "false")' \
		'nodelay:bool' \
		'interval:uinteger' \
		'resend:range(0,2)' \
		'nc:bool' \
		'acknodelay:or("true", "false")' \
		'sockbuf:uinteger' \
		'smuxver:or("1", "2")' \
		'smuxbuf:uinteger' \
		'streambuf:uinteger' \
		'keepalive:uinteger' \
		'snmpperiod:min(1)'
}

validate_client_file() {
	local file="$1"

	if [ ! -f "$file" ]; then
		return 1
	fi

	test -x "$file" || chmod 755 "$file"

	( $file -v 2>/dev/null | grep -q "kcp" )
}

start_kcptun_instance() {
	local section="$1"

	if ! validate_config_section "$section" ; then
		_log "err" "Config validate failed."
		return 1
	fi

	if [ -z "$server" ] || [ "$server" = "nil" ]; then
		_log "info" "No server selected, Client will stop."
		return 0
	elif ! validate_server_section "$server"; then
		_log "err" "Server config validation failed."
		return 1
	elif [ -z "$server_addr" ] || [ -z "$listen_port" ]; then
		_log "err" "Server config validation failed."
		return 1
	fi

	if [ -z "$client_file" ]; then
		_log "err" "Please set client file path, or use auto download."
		return 1;
	elif ! validate_client_file "$client_file"; then
		_log "err" "Client file validation failed."
		return 1
	fi

	is_ipv6_address() {
		echo "$1" | grep -q ":"
	}

	is_ipv6_address "$server_addr" && server_addr="[${server_addr}]"
	is_ipv6_address "$listen_addr" && listen_addr="[${listen_addr}]"

	test -d "$CONFIG_FOLDER" || mkdir -p "$CONFIG_FOLDER"

	log_file=""
	if [ "x$enable_logging" = "x1" ]; then
		mkdir -p "$log_folder"
		chown -R "$daemon_user" "$log_folder"
		log_file="${log_folder}/client.${section}.log"
	fi

	local config_file="${CONFIG_FOLDER}/client.${section}.json"

	if ! ( gen_client_config_file "$config_file" ); then
		_log "err" "Can't create config file".
		return 1
	fi


	procd_open_instance
	procd_set_param command "$client_file"
	procd_append_param command -c "$config_file"
	procd_set_param respawn
	procd_set_param user "$daemon_user"
	procd_set_param file "$config_file"
	procd_close_instance
}

service_triggers() {
	procd_add_reload_trigger "$KCP0"
}

start_service() {
    sleep 1

	config_load "$KCP0"
	config_foreach start_kcptun_instance "general"
}

我这个是老版本的脚本没有更新，而且去除了开放端口的部分，你们对照着原版看我改了什么可以自己修改 需要三开四开的就把KCP0 kcp0改成KCP1 kcp1就行了

[Ding-Kyoma]

@sqliuchang 你的模板跟（1.5.2-1）很接近，应该是同一版

另外创建了 /var/etc/kcp0/client.general.json，给init加了x权限 不过用了你的模板还是开不起来

是不是还有什么步骤遗漏的？

[sqliuchang]

kcp0.zip @GTGraphics3 应该是你config文件没配置好吧，你在luci下配置好kcptun之后，停止kcptun，然后复制这个配置文件/etc/config/kcptun到/etc/config/kcp0，然后启用kcp0试一下。还是不行的话可以用sh -x来调试。

[Ding-Kyoma]

@sqliuchang 非常感谢，在配置过/etc/config/kcp0后多开成功了！