Add some examples of improper submitted issues

[satyampsoni]

trafficstars

Describe the issue

While going through the "development.md" file on GitHub (link: https://github.com/kubernetes/community/blob/master/contributors/devel/development.md), I came across the guidelines on how to raise performance improvement issues. The document provides information on three specific issues that are considered proper for raising performance-related concerns. After reviewing these issues, I gained a rough understanding of how such problems should be reported for performance testing. However, I couldn't find any information regarding the improper ways to publish these issues. It would be helpful to have a list of improper issues as well, as it would provide clarity to readers. That can be added below this section

[allgandalf]

/sig docs

[haripriya9647]

/assign

[divya-mohan0209]

This is not related to the official Kubernetes documentation or SIG Docs and is related to contributor experience. Please tag the relevant SIG.

[divya-mohan0209]

/remove-sig docs

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle stale
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle rotten
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[pranav-pandey0804]

/sig contributor-experience

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue, marking it as "Not Planned".

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.