Hiking-DDS238-2-WIFI-Din-Rail-Energy-Meter-flashing-Tasmota
Hiking-DDS238-2-WIFI-Din-Rail-Energy-Meter-flashing-Tasmota copied to clipboard
krikk
Hello, I have followed the flashing method some time ago and managed to integrate this meter into HA. It works fine except for two issues, one which I noticed just...
Thank you for this page. I wasn't able to flash it without desoldering the wifi module but finally everything works. Does anyone know if i can change the timezone in...
@krikk thanks a lot for this repo, helps a lot. The new version has the silk screen on top, thought I might share. The red labels show how to connect...
FYI: sold in Germany (Europe?) as Ketotek KTEM06 on amazon
Hi, @krikk - Thanks for all the info in your guide. I have flashed 3 DDS238-2 energy meters. For anyone who doesn't have a bench power supply and doesn't want...
Hey, thank you for the guide, it really helped a lot. I was new to flashing the ESP this way, so struggled a bit. I found a youtube video that...
Connect a buzzer (3V active type) to GPIO15 and GND. Better to use a mosfet (BS170) to ensure the ESP is not overloaded. **Use this template:** {"NAME":"Hiking DDS238-2 WIFI","GPIO":[0,2272,0,2304,0,0,0,0,0,0,320,480,32,0],"FLAG":0,"BASE":54} Configure...
Hello, for me the flashing procedure without desoldering did not work. However, I found a workaround: [https://familie-emmrich.de/Ketotek.jpg](https://familie-emmrich.de/Ketotek.jpg) I cut the RX connection on the PCB. I also used the standard...
Hi, Could you be so kind to publish in github oriinal firmware of TYWE3S from HIKING DDS238-2 WI-FI?
I've been using DDS238-2s with tasmota for several years and the counting data is sent directly to my domoticz (domoticz configuration and Idx10 P1 Smartmeter sensor configuration). Everything works fine...
