Kevin P. Fleming

GNOME Version 3.32.2

Possibly @smaffulli could help out here.

I've just used this guide to setup my system (waiting for gpsd to select the proper baud rate...). A couple of notes: * The `cgps` tool is in the `gpsd-clients`...

Also, the 'baud rate' problem (where gpsd doesn't detect the baud rate properly) can be solved by dropping a file at `/etc/systemd/system/gpsd.service.d/override.conf` with the following contents: ``` [Service] ExecStartPre=/usr/bin/stty -F...

If appropriate, I can add a section to README.md with example commands for how to link `ubxtool` to `gpsd`.

This has now been running on my system for more than 36 hours and everything is stable; all three processes (ubxtool, gpsd, and chrony) are running on an RPi 4B,...

This is 'expected behavior', for what it is worth. The first time you run ubxtool you configure the device to meet your requirements/preferences, and then after that you don't need...

Indeed you are correct; it's been a while since I setup my modules and I had forgotten about this quirk. I think I used the `ubxtool` program (confusingly named the...

Just installed Jellyfin (removed Emby) and seeing this behavior too.

In my case I don't even need to *change* any settings; just clicking the 'Series Settings' link after clicking "Record Series" causes this to happen. If I avoid clicking that...