glinetpineapple
glinetpineapple copied to clipboard
kow
Flash successful, will not respond on WAN port
AR-150 will not generate traffic on WAN port, nor assign DHCP in range 172.16.42.100-150 (as it should when emulating the Pineapple). AR-150 is not "bricked" as it replies normally via WiFi port on 192.168.8.1 (see below). When I browse (using Chrome) to 192.168.8.1:1471 over WiFi, I get the default setup screen, but when I click "Get Started" I get a popup window saying "The WiFi Pineapple is still booting - Please wait until the WiFi Pineapple has fully booted. The setup will continue automatically." and the screen never goes away, nor does setup proceed any further.
Apologies if this is the wrong place to ask this question.
Nmap scan report for 192.168.8.1 Host is up, received conn-refused (0.0014s latency). Scanned at 2016-05-22 05:31:27 EDT for 71s PORT STATE SERVICE REASON VERSION 22/tcp open ssh syn-ack Dropbear sshd 2015.67 (protocol 2.0) |ssh-hostkey: 53/tcp open domain syn-ack dnsmasq 2.73 | dns-nsid: | bind.version: dnsmasq-2.73 80/tcp open http syn-ack nginx 1.4.7 |_http-favicon: Unknown favicon MD5: D41D8CD98F00B204E9800998ECF8427E |_http-methods: No Allow or Public header in OPTIONS response (status code 405) |_http-title: Site doesn't have a title (text/html; charset=UTF-8). 1471/tcp open http syn-ack nginx 1.4.7 |_http-methods: No Allow or Public header in OPTIONS response (status code 405) |_http-title: WiFi Pineapple Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
Same issue here.
I can ssh in using the admin password and even get the Pineapple MOTD but it doesn't appear as though it's booting fully.
Same issue here.
I did sysupgrade -F -v /tmp/<upgrade_package> over Wifi :) After a
`Switching to ramdisk... Performing system upgrade... Unlocking firmware ...
Writing from
Appending jffs2 data from /tmp/sysupgrade.tgz to firmware...`
This was the last message (after 5 minutes waiting)
Afterwards I rebooted the AR-150, where
- Pine management Wifi network was still operational
- Accessible through SSH
- Webinterface showing: Please wait until the WiFi Pineapple has fully booted. The setup will continue automatically.
Anyone solved this problem already?
