Emil Fresk

In general I see no issue with this, but the STDC14 connector has GND on the KEY pin. One could add a dual MOSFET to switch between GND or 5V....

I fixed this for v1.3 :)

Hi, unfortunately this looks like an accidental mix-up :( It should be on pin 9 on the STDC14 and pin 7 on the Cortex-M Debug connector. "Luckily" the trace is...

Hi, thanks for the kind words! The hardware design was made with the main focus of being a reference USB 2.0 High-Speed probe for probe-rs. This does not impact support...

Do so, it would be awesome to see more open hardware high-speed probes!

I'd not have it persistent as in "stored in eeprom" as this might have strange effect when going between different boards. However to keep it during one "plug in" is...

And now with the v1.3 there is one more place 5V can come that needs to be handled (KEY pin). :)

For the VCP remember to swap the RX/TX pair if testing :) They were accidentally swapped in the design.

At the ESD chip

Oh, maybe I got it wrong 2 times xD