CoolReader 3 - free e-book reader (c) Vadim Lopatin, 1998-2009

LICENSE: All source codes (except thirdparty directory) are provided under the terms of GNU GPL license, version 2

Source codes are available at sourceforge: git clone git://crengine.git.sourceforge.net/gitroot/crengine/crengine

Directories:

crengine - CREngine (DOM/XML/CSS ebook rendering library) sources cr3gui - CR3 with CR3GUI for e-ink devices sources cr3qt - CR3 with Qt based GUI cr3wx - CR3 with wxWidgets based GUI thirdparty - third party libraries, to use if not found in system (zlib, libpng, libjpeg, freetype) tinydict - small library for .dict file format support tools - miscellaneous configuration files android - Android port

External dependencies:

common: zlib, libpng, libjpeg, freetype cr3gui/xcb: libxcb, fontconfig cr3gui/nanoX: libnanoX cr3/Qt: qt4-core, qt4-gui cr3/wx: wxWidgets 2.8

e.g., for Ubuntu you may use

sudo apt-get install git-core cmake libqt4-dev libpng12-dev libfreetype6-dev libjpeg62-dev libfontconfig1-dev zlib1g-dev

Packaging:

Debian based packages included to project: packages/ubuntu -- debian package for Ubuntu, with Qt frontend packages/openinkpot -- debian package for OpenInkpot, with XCB frontend

To build debian package, copy one of package descriptions from packages directory: cp -r packages/ubuntu/debian debian Then, package can be built using debuild command.

Build instructions:

Building QT version

libqt4-dev should be installed

mkdir qtbuild cd qtbuild cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -D MAX_IMAGE_SCALE_MUL=2 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1400000 -D CMAKE_INSTALL_PREFIX=/usr .. make sudo make install

Building QT version, in DEBUG mode

mkdir qtbuild cd qtbuild cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Debug -D MAX_IMAGE_SCALE_MUL=2 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1400000 -D CMAKE_INSTALL_PREFIX=/usr .. make sudo make install

Building QT version, in DEBUG mode, ANTIWORD development

mkdir qtbuild cd qtbuild cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Debug -D ENABLE_ANTIWORD=1 -D MAX_IMAGE_SCALE_MUL=2 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1400000 -D CMAKE_INSTALL_PREFIX=/usr .. make sudo make install

Building wxWidgets version

libwxgtk2.8-dev should be installed

mkdir wxbuild cd wxbuild cmake -D GUI=WX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=/usr .. make

Building ARM version on OpenInkpot:

mkdir armbuild cd armbuild cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-oi.cmake -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Release -D GUI=CRGUI_XCB -D USE_EXTERNAL_EDICT_DICTIONARY=1 .. make

Building i386 version, Qt backend V3 simulation:

mkdir qt-v3 cd qt-v3 cmake -D DEVICE_NAME=v3 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Debug -D USE_STATIC_ZLIB=1 -Wdev -D ENABLE_ANTIWORD=1 -D CMAKE_INSTALL_PREFIX=dest -D GUI=CRGUI_QT -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 .. make

Building i386 version (for OpenInkpot), V3 simulation:

mkdir xcb-v3 cd xcb-v3 cmake -D DEVICE_NAME=v3 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Debug -D USE_STATIC_ZLIB=1 -Wdev -D ENABLE_ANTIWORD=1 -D CMAKE_INSTALL_PREFIX=/usr -D GUI=CRGUI_XCB -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 .. make

Building i386 version (for OpenInkpot), n516/azbooka simulation:

mkdir xcb-n516 cd xcb-n516 cmake -D DEVICE_NAME=n516 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Debug -D CMAKE_INSTALL_PREFIX=/usr -D GUI=CRGUI_XCB .. make

Building Jinke/LBook V3 viewer plugin (libfb2.so):

mkdir v3build cd v3build mkdir dest cmake -D DEVICE_NAME=v3 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v3.cmake -D GUI=CRGUI_JINKE_PLUGIN -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make

Building Jinke/LBook V3 viewer plugin (libfb2.so), new SDK:

mkdir v3build cd v3build mkdir dest cmake -D DEVICE_NAME=v3 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=CRGUI_JINKE_PLUGIN -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make

Building Jinke/LBook V3 fb2props plugin for Bookshelf (libfb2props.so) i386:

mkdir fb2props386 cd fb2props386 mkdir dest cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Debug -D CMAKE_INSTALL_PREFIX=dest .. make

Building Jinke/LBook V3 fb2props plugin for Bookshelf (libfb2props.so):

mkdir v3fb2propsbuild cd v3fb2propsbuild mkdir dest cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v3.cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make

Building Jinke/LBook V3 fb2props plugin for Bookshelf NEW SDK (libfb2props.so):

mkdir v3newfb2propsbuild cd v3newfb2propsbuild mkdir dest cmake -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D GUI=FB2PROPS -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest .. make

Building Jinke/LBook V3 new SDK viewer app (cr3):

mkdir v3app cd v3app #cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D MAX_IMAGE_SCALE_MUL=2 -D GUI=CRGUI_NANOX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 -D BIG_PAGE_MARGINS=1 .. cmake -D DEVICE_NAME=v3 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-linux-gnueabi.cmake -D MAX_IMAGE_SCALE_MUL=2 -D GUI=CRGUI_NANOX -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x500000 .. make

Building Jinke/LBook V5 viewer app (cr3):

mkdir v5build cd v5build cmake -D DEVICE_NAME=v5 -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D GRAY_BACKBUFFER_BITS=3 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x580000 .. #cmake -D DEVICE_NAME=v5 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D GRAY_BACKBUFFER_BITS=3 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest ..

make

Building Jinke/LBook V3+ viewer app (cr3):

mkdir v3abuild cd v3abuild cmake -D DEVICE_NAME=v3a -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-v5.cmake -D GUI=CRGUI_NANOX -D CR3_PNG=1 -D CR3_JPEG=1 -D CR3_FREETYPE=1 -D GRAY_BACKBUFFER_BITS=4 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D RAM_COMPRESSED_BUFFER_ENABLED=0 -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x1000000 .. make

Building ARM version for PocketBook:

mkdir pb360 cd pb360 cmake -D DEVICE_NAME=pb360 -D CMAKE_INSTALL_PREFIX=/usr/local/pocketbook/mnt/ext1 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-pocketbook.cmake -D CMAKE_CXX_FLAGS_RELEASE:STRING="-fomit-frame-pointer -O1" -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Release -D GUI=CRGUI_PB -D ENABLE_CHM=1 -D ENABLE_ANTIWORD=1 .. make

Building ARM version for PocketBook Pro

mkdir pbPro cd pbPro cmake -D DEVICE_NAME=pb360 -D CMAKE_INSTALL_PREFIX=/usr/local/pocketbook/mnt/ext1 -D CMAKE_TOOLCHAIN_FILE=../tools/toolchain-arm-gnu-eabi-pocketbook.cmake -D MAX_IMAGE_SCALE_MUL=2 -D CMAKE_BUILD_TYPE=Release -D ENABLE_CHM=1 -D ENABLE_ANTIWORD=1 -D GUI=CRGUI_PB -D POCKETBOOK_PRO=1 ..

Building Jinke/LBook V3+ simulator for Win32 (cr3):

mkdir v3win32 cd v3win32 cmake -D DEVICE_NAME=v3a -G "Visual Studio 10" -D MAX_IMAGE_SCALE_MUL=2 -D GUI=CRGUI_WIN32 -D GRAY_BACKBUFFER_BITS=4 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dest -D DOC_DATA_COMPRESSION_LEVEL=1 -D DOC_BUFFER_SIZE=0x800000 .. make

============================== *** QT Build under Windows ***

Using QT SDK  

Environment setup:

• Download and install QT SDK, git, cmake, msys
• Copy contents of git and cmake dirs to QT/mingw/
• Copy make.exe from msys/bin to QT/mingw/bin

Run Qt SDK / Qt Command Prompt. Execute:

sh git clone git://crengine.git.sourceforge.net/gitroot/crengine/crengine mv crengine cr3 cd cr3 mkdir qtbuild cd qtbuild cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -G "MSYS Makefiles" -D USE_QT_ZLIB=1 -D CMAKE_INSTALL_PREFIX=dist .. make make install

cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -G "Visual Studio 9 2008" -D USE_QT_ZLIB=1 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1500000 -D CMAKE_INSTALL_PREFIX=dist .. cmake -D GUI=QT -D CMAKE_BUILD_TYPE=Release -G "Visual Studio 10" -D USE_QT_ZLIB=1 -D MAX_IMAGE_SCALE_MUL=2 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1500000 -D CMAKE_INSTALL_PREFIX=dist .. to disable console, use /SUBSYSTEM:WINDOWS linker option instead of /SUBSYSTEM:CONSOLE

For QT5, use GUI=QT5 instead of GUI=QT For building Qt5 app from QtCreator remove -G (generator) parameter: Release build: -D GUI=QT5 -D CMAKE_BUILD_TYPE=Release -D CMAKE_INSTALL_PREFIX=dist .. Debug build: -D GUI=QT5 -D CMAKE_BUILD_TYPE=Debug -D CMAKE_INSTALL_PREFIX=dist ..

It will put built cr3.exe and all necessary distribution files to directory qtbuild/dist. You need also add following DLLs to this directory in order to get cr3.exe working:

• mingwm10.dll
• QtCore4.dll
• QtGui4.dll
• libz.dll

============================== === Qt Build under Mac OSX ===

#configure and make Qt as static libraries #Inside Qt source root: ./configure -prefix /Developer/Qt -opensource -static -release -arch x86 -arch x86_64
-no-accessibility -no-stl -no-qt3support -qt-zlib -no-gif -no-libtiff -qt-libpng -qt-freetype -no-libmng -qt-libjpeg -no-nis -no-cups -no-iconv -no-pch -no-dbus -no-opengl -no-fontconfig
-no-xmlpatterns -no-multimedia -no-phonon -no-phonon-backend -no-audio-backend -no-openssl
-no-gtkstyle -no-svg -no-webkit -no-javascript-jit -no-script -no-scripttools -no-declarative #make Core and GUI libraries make sub-src #make symlinks from pad to /Developer/Qt for bin, include, lib, src dirs #É

#inside cr3 directory #configure using cmake mkdir macbuild cd macbuild cmake -G "Unix Makefiles" -D GUI=QT -D CMAKE_OSX_ARCHITECTURES="i386 x86_64" -D QT_QMAKE_EXECUTABLE=/Developer/Qt/bin/qmake -D CMAKE_BUILD_TYPE=Release -D MAX_IMAGE_SCALE_MUL=2 -D DOC_DATA_COMPRESSION_LEVEL=3 -D DOC_BUFFER_SIZE=0x1400000 -D CMAKE_INSTALL_PREFIX=cr3.app .. make make install