konnected-security

konnected-security copied to clipboard

Updates the release workflow to copy the OTA image file to release assets.

h2zero

brianegge

Raising PR again.

brianegge

Hi! I added a "customBeep" function so that I can call it as a custom action inside Hubitat's rules system. This allows you to set different beeps based on different...

mgroeninger

Fixed firmware link

lostage

Firmware v3.0.1 no longer polling DS18B20 & reporting temp

2

REF: https://www.facebook.com/groups/konnected.io/posts/1556001921433830/ Verified with two different DS19B20 sensors & connected to two different pins. This was working with firmware 2.3.5. Once I upgraded to v3.x, the DS18B20 no longer reports...

andrewconnell

Enhancement: Manual Add IP and Port

1

When SSDP is being troublesome it would be great if the Hubitat connector had the ability to enter the IP and port manually.

satellite-no

Temperature spikes with ds18b20 using konnected-temperature-probe-ds18b20.groovy

1

 I'm having an issue where certain temperatures readings with my ds18b20 are 1 degree higher only on certain temperature readings. What should be: 89.7 reads 90.7 87.9 reads 88.9...

sapman1208

No Boot issue when Auxiliary Devices Connected

2

So there seems to be a odd issue with my konnected panel. I have confirmed this is a repeatable problem and has been happening much more recently. If I have...

blueknight768

I would like to activate more actuator on a module, but it is not woking. modul not answering to the 2nd request, if it is ordered near the same time.

Korte68