konnected-esphome

konnected-esphome copied to clipboard

GDO blaQ / purple button / Home Assistant: light entity state incorrect after manually changing light

1

Steps to Reproduce: 1. Open the garage door. Notice that the light on the GDO turns on, and the light entity in Home Assistant reflects this. 2. Use the Home...

drothenberger

Warnings in HA when running

3

Looks like HA is printing these warnings for the alarm panel pro and the garage opener (same message). ``` 2023-11-19 10:31:28.264 WARNING (MainThread) [homeassistant.components.sensor] Entity sensor.alarm_panel_pro_xxxxxx_wifi_signal () is using native...

michael-robbins

Additional substitution to set allow_other_uses to false for alarm pin

3

Would it be possible to add a substitution to set allow_other_uses to false for the alarm pin? Currently there is only the substitution for the warning beep pin. My alarm...

jcbshw

I've been using using the konnected software since forever with home assistant. I'm on Firmware 2.3.0. Is there an easy/automated way to migrate to esphome from the konnected firmware v...

johnthomas00

Add door-open-chime.yaml and add option to set alarm output shared as false

1

door-open-chime.yaml: Add a package that creates a virtual button that on press pulses on the selected output (usually connected to a piezo buzzer). This would typically be used as a...

SteeledKnight

"incorrect_codes" counter is not updated in local alarm

2

When using local alarm, the `incorrect_codes` counter is not updated when failed_code is triggered. Therefore, the alarm is not triggered when the incorrect codes count is exceeded.

jordan875

Guys Can you please update your Readme to reflect the new yaml files and what changes should be made?

m0dded