Marlin-2-0-x-Anycubic-i3-MEGA-S

Marlin-2-0-x-Anycubic-i3-MEGA-S copied to clipboard

[BUG] Bulging approximately from the 6th layer

1

### Bulging approximately from the 6th layer ### Steps to Reproduce I made some upgrades to my Anycubic I3 Mega Pro: 1. Self-printed [Anycubic i3 Mega X-Carriage [MK4]](https://www.thingiverse.com/thing:3537449) 2. Installed...

madcowkp

Using Chiron TMC, 1.5.3: no z gcode +1 or -1 is listed under special menu. Unable to set a z persistent offset.

chazzy25011

[BUG] Anycubic Mega S not X homing anymore with 1.5.4

2

### Bug Description My Anycubic Mega S (with TMC2209) doesn't home anymore in X axis with 1.5.4, working well with 1.5.3 ### Steps to Reproduce 1. Install MEGA_S_TMC_v1.5.4.hex firmware 2....

Alkerion

### Bug After installing the new firmware (DGUS_TMC_v1.5.3) as well as TMC2209 drivers in my Mega X, the z-axis makes a lot of noise compared to the x- and y-axis...

dimar01

[BUG] Bed does not show up in ESP3D

1

### Bug Description Bed does not show up in ESP3D web UI ### Steps to Reproduce Install esp01 with knutwurst's esp3d firmware **Expected behavior:** Both bed and hotend is shown...

Tobim6

### Bug Description The extruder thermistor defined in Configuration.h for the i3 Mega S appears to be incorrect. Anycubic's Marlin build (from their github repository uses `#define TEMP_SENSOR_0 5` whereas...

hooskworks

### Bug Description The printer reports diferent temperatures to OctoPrint. The Anycubic LCD screen ist stable to 230C° and 75C°. There is nothing special in the GCODE with changing temperatures....

NilsRo