Marlin-2-0-x-Anycubic-i3-MEGA-S
Marlin-2-0-x-Anycubic-i3-MEGA-S copied to clipboard
knutwurst
Marlin 2.0.x Version for Anycubic i3 MEGA M/S/P/X/CHIRON and 4MAX with Anycubic TFT or the "new" DGUS Clone TFT - Now also with BLTouch!
你好 zusammen, ### Bug After the machine stops after the material is cut off, click to resume printing, and printing cannot continue（MEGA_S_DGUS_TMC_v1.4.4.hex） ### Steps to Reproduce 1. [First Step] Click...
### Bug Description Strange traverse path after G29 in the Cura start code. ### Steps to Reproduce 1. Install BL Touch 2. Change start code in Cura. I changed the...
### Bug Description On the print start the printer halts and warns about filament runout. ### Steps to Reproduce 1. Update the startup GCode of your silcer adding "M402 S0"...
### Description Would it be possible to parse the line `;TIME:` from a gcode file that was exported with Cura and display the remaining time (from first command in print,...
Hey, first things first, great work :) i am so happy that i found your project, since yesterday i can print again because of the mesh leveling. Acutal problem or...
Messung Vref/Imax für TMC2208 Anycubic Mega X: Ich habe seit kurzem einen Anycubic Mega X und habe diesen nach Deiner Anleitung auf die Treiber TMC2208 umgerüstet. Da ich bisher nur...
Hi, I installed the latest firmware (knutwurst_MEGA_S_DGUS_v1.4.4.hex) on my i3 Mega S (with no modifications and DGUS Display like described in the HowTo). After installing, I reseted to defaults and...
### Description At last I managed to build the desired firmware with WiFi activated, but it took me quite some time to figure out I had to build a new...
### Requirements - AnyCubic 4MaxPro1 - BLTouch ### Description I tested the "4MAXP2_BLT_10" and it doesn't work for the 4MaxPro1. I suggest having a separate default_envs for the first Pro...
Changes to use the BlTouch as an End Z-Stop. Way more structured on GitHub than in the Facebook Group, for anyone who also wants to implement it. I haven't changed...
