pi-build icon indicating copy to clipboard operation
pi-build copied to clipboard

Published 20 hours ago • verified publisher icon km4ack

Conky

Open MPlocar opened this issue 2 years ago • 2 comments

Unable to get the Conky screen to move to the top/right of the monitor. Screen res is 1920x1080

MPlocar avatar Feb 12 '23 16:02 MPlocar

If you're willing, give this a try and report back if it takes care of your issue:

sudo vi /boot/config.txt

Uncomment these two lines and adjust the resolution to 1920x1080:

framebuffer_width=1920 framebuffer_height=1080

Then finally:

sudo reboot

DanDawson avatar Mar 09 '23 20:03 DanDawson

Hi Jason: just today I watched a video of yours and it convinced me I had to try your Pi-buld. It is now up and running and I need to configure a bunch of stuff. One thing you showed in a video was how to change the size of conky, it was right near the end of the video. I will be darned if I can find it. My conky runs off the bottom of the RPi screen. Can you point me to that video? Thanks. de Dennis, K1YPP

k1ypp avatar Feb 24 '24 05:02 k1ypp