kliment

What did you change to make it work? That last error is something on our side. Can you enable "settings" -> "debug communications" and run it again? Also, which version...

I believe what's happening here is a focus issue - u and d are only handled by the gcode viewer, so nothing else can catch those events, but once you...

Probably - what processor does it have? On 11/09/2015 02:38 PM, José Xavier wrote: > Hello, > > I have a extra board from makerbot replicator 2. It is possible...

On 08/05/2012 09:52 AM, sangjoo wrote: > #define Y_MIN_PIN 20 in pins.h > is same PB0_SS_PCINT0 in Teensy2.0++ (A90USB1286) > > I think the PB0_SS_PCINT0 port is crashed intenally. >...

On 08/05/2012 10:57 AM, sangjoo wrote: > this is not normal condition. one pin's current is > current arround 80mA > > --- > > Reply to this email directly...

On 08/05/2012 11:15 AM, sangjoo wrote: > This is not normal condition. > need to compare with other X_ENDSTOP and Z_ENDSTOP. These pins only current 0.15mA. > I think Y_ENDSTOP...

Hey, I don't like this because it makes the config file huge and confusing. Maybe if the machine definitions were at the end of the file it would be better....

I would prefer having the formula in comments next to the numbers, and keeping the numbers as they are. Having commented out premade configs for existing machines is okay, but...

The problem is not space but complexity. Some people have leadscrew-driven axes. Some people have direct drive extruders. Some people have belt or rack/pinion axes. Measuring the effective diameter of...

CE is not an agency, neither is UL. UL is a testing lab. Here is what we need: Electrical safety certification (easy for low voltage DC stuff, we're safe) Conducted...