WThermostatBeca icon indicating copy to clipboard operation
WThermostatBeca copied to clipboard

Published 20 hours ago • verified publisher icon klausahrenberg

Clock problem

Open tibo888 opened this issue 4 years ago • 8 comments

Hello, The clock does not show the correct time. on the other hand mqtt is correct

Configuration clock

  • Use fixed offset to UTC time -> "epochTimeFormatted":"2020-10-04 07:31:47" CORRECT
  • Get time zone via internet -> "epochTimeFormatted":"2020-10-04 07:41:38" CORRECT

But clock time from the thermostat -> 23H02 NOT CORRECT

Ps: Guys, you doing a great job IMG_20201004_074508

tibo888 avatar Oct 04 '20 12:10 tibo888

@tibo888 please check you setup. With firmware v1.18 works fine. image

kibermanis avatar Oct 04 '20 15:10 kibermanis

Hi, I checked it at my model (BHT-002-GBLW) and its working fine with 'timezone via internet' and/or 'fixed offset'. I need more information. Which firmware version (v1.18)? Which model? Did you received messages like 'unknown MCU command' in MQTT?

klausahrenberg avatar Oct 04 '20 22:10 klausahrenberg

@tibo888, your picture is showing a red center touch button. Is that really red or did the camera just get the colors wrong?

UlrichMai avatar Oct 05 '20 07:10 UlrichMai

Hello everyone, @kibermanis i check the setup. i install the firmware v1.18 yesterday (previsouly 1.11) and the same setup. the problem is still there. @klausahrenberg, this is the information Model BHT-002-GBLW No MCU error @UlrichMai the center touch button is orange

thanks for help

tibo888 avatar Oct 05 '20 22:10 tibo888

Hello I found something interesting I have 2 thermostats that are working properly and others that are not

WORK IMG_20201006_123703

DONT IMG_20201006_123341

tibo888 avatar Oct 06 '20 17:10 tibo888

Hello, I'm using the zigbee version BHT-002-GCLZ with zigbee2mqtt. I'm facing the same issue. Did you find any workaround ? I also ask my question here: https://github.com/Koenkk/zigbee2mqtt/issues/4185#issuecomment-724245233

1300371 avatar Nov 09 '20 20:11 1300371

I do have the same issue: The clock of my thermostat ME81(A)H / firmware 1.20l is not set correctly via ntp. Reads/writes via MQTT are working. My NTP settings are exactly the same as in the screenshot from @kibermanis No MCU Error messages in the MQTT output.

Gulpman avatar Feb 03 '21 21:02 Gulpman

The issue seems resolved on z2m side with the tuya reimplementation. See https://github.com/Koenkk/zigbee2mqtt/issues/4185#issuecomment-771608497

1300371 avatar Feb 10 '21 08:02 1300371