home-assistant-glow
home-assistant-glow copied to clipboard
klaasnicolaas
⚡ The power of energy measurements in your house
Hi I am using a D1 MINI with a basic red LED. I noticed that the LED doesn't flash everytime there is a pulse detected on the photodiode. It only...
Is there a way to filter out the spikes created when power increases suddenly and that creates a huge spike as can be seen below. If someone has a suggestion...
magnet?
How is the 3D printed housing secured to the energy meter? Double sided tape? There is metal (magnetic?) ring on the meter that should be used for these things, right?
Hi, I am not likely to have an easily accessible power source near my meter (ironic, I know!) and was wondering if PoE would be an option? (Say, using one...
Using GPIO12 for the sensing LED interferes with the boot process as it is a strapping pin. The compilation process also warns about this:  This caused an issue for...
Hello, This is a great app and great use of ESPhome. I have had this running for a few months, and there was always a small periodic spike that I...
Hi I can't get the sensor to detect the LED of my meter. I set the sensitivity to the lowest possible without triggering on it's own. On another meter of...
Hello, I am kind of new to this whole HA/ESPHome/monitoring/sensors thing, but I wanted to check how accurate glow is nad from my basic math comparing power on my power...
adding uptime sensor as explained in https://esphome.io/components/sensor/uptime.html
I find it useful to have an Uptime Sensor in HA Glow. I've copied right away from the ESPHome-Page from the ["Human readable sensor" Section](https://esphome.io/components/sensor/uptime.html#human-readable-sensor) I'm not so familiar with...
Metadata
Owner
Metadata
⚡ The power of energy measurements in your house