tello-gesture-control
tello-gesture-control copied to clipboard
Published
20 hours ago •
kinivi
kinivi
Installation of requirements failed on macOS Sonoma
I get an error trying to install the requirements.
MacOS Sonoma 14.1.1 Python 3.7.17 Installed yesterday from source (https://www.python.org/downloads/release/python-3717/) because brew said "Error: [email protected] has been disabled because it is deprecated upstream!"
Installed by using ./configure make make test sudo make install
Changed to standard version by using:
vi ~/.bash_profile
alias python='/usr/local/bin/python3.7'
Tried with different python versions (3.8, 3.11 and 3.12), Same Error
Can you please help me? Thanks in advance.
sinasteinmuller@MBP-von-Sina ~ % python --version
Python 3.7.17
sinasteinmuller@MBP-von-Sina ~ % cd Developer/tello-gesture-control-main
sinasteinmuller@MBP-von-Sina tello-gesture-control-main % pip3 install -r requirements.txt
Collecting ConfigArgParse==1.2.3 (from -r requirements.txt (line 3))
Using cached ConfigArgParse-1.2.3.tar.gz (42 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting djitellopy==1.5 (from -r requirements.txt (line 4))
Using cached djitellopy-1.5.tar.gz (5.8 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting numpy==1.19.3 (from -r requirements.txt (line 5))
Using cached numpy-1.19.3.zip (7.3 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Collecting opencv_python==4.5.1.48 (from -r requirements.txt (line 6))
Using cached opencv-python-4.5.1.48.tar.gz (88.3 MB)
Installing build dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> [1230 lines of output] Ignoring numpy: markers 'python_version == "3.6" and platform_machine != "aarch64"' don't match your environment Ignoring numpy: markers 'python_version >= "3.6" and sys_platform == "linux" and platform_machine == "aarch64"' don't match your environment Ignoring numpy: markers 'python_version == "3.7" and platform_machine != "aarch64"' don't match your environment Ignoring numpy: markers 'python_version == "3.8" and platform_machine != "aarch64"' don't match your environment Collecting setuptools Using cached setuptools-69.0.2-py3-none-any.whl.metadata (6.3 kB) Collecting wheel Using cached wheel-0.42.0-py3-none-any.whl.metadata (2.2 kB) Collecting scikit-build Using cached scikit_build-0.17.6-py3-none-any.whl.metadata (14 kB) Collecting cmake Downloading cmake-3.28.0-py2.py3-none-macosx_10_10_universal2.macosx_10_10_x86_64.macosx_11_0_arm64.macosx_11_0_universal2.whl.metadata (6.3 kB) Collecting pip Using cached pip-23.3.1-py3-none-any.whl.metadata (3.5 kB) Collecting numpy==1.19.3 Using cached numpy-1.19.3.zip (7.3 MB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting distro (from scikit-build) Using cached distro-1.8.0-py3-none-any.whl (20 kB) Collecting packaging (from scikit-build) Using cached packaging-23.2-py3-none-any.whl.metadata (3.2 kB) Using cached setuptools-69.0.2-py3-none-any.whl (819 kB) Using cached wheel-0.42.0-py3-none-any.whl (65 kB) Using cached scikit_build-0.17.6-py3-none-any.whl (84 kB) Downloading cmake-3.28.0-py2.py3-none-macosx_10_10_universal2.macosx_10_10_x86_64.macosx_11_0_arm64.macosx_11_0_universal2.whl (48.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.5/48.5 MB 11.7 MB/s eta 0:00:00 Using cached pip-23.3.1-py3-none-any.whl (2.1 MB) Using cached packaging-23.2-py3-none-any.whl (53 kB) Building wheels for collected packages: numpy Building wheel for numpy (pyproject.toml): started Building wheel for numpy (pyproject.toml): still running... Building wheel for numpy (pyproject.toml): finished with status 'error' error: subprocess-exited-with-error
× Building wheel for numpy (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [1182 lines of output]
setup.py:67: RuntimeWarning: NumPy 1.19.3 may not yet support Python 3.11.
warnings.warn(
Running from numpy source directory.
numpy/random/_bounded_integers.pxd.in has not changed
numpy/random/_philox.pyx has not changed
numpy/random/_bounded_integers.pyx.in has not changed
numpy/random/_sfc64.pyx has not changed
numpy/random/_mt19937.pyx has not changed
numpy/random/bit_generator.pyx has not changed
Processing numpy/random/_bounded_integers.pyx
numpy/random/mtrand.pyx has not changed
numpy/random/_generator.pyx has not changed
numpy/random/_pcg64.pyx has not changed
numpy/random/_common.pyx has not changed
Cythonizing sources
blas_opt_info:
blas_mkl_info:
customize UnixCCompiler
libraries mkl_rt not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
blis_info:
libraries blis not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
openblas_info:
libraries openblas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
atlas_3_10_blas_threads_info:
Setting PTATLAS=ATLAS
libraries tatlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
atlas_3_10_blas_info:
libraries satlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
atlas_blas_threads_info:
Setting PTATLAS=ATLAS
libraries ptf77blas,ptcblas,atlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
atlas_blas_info:
libraries f77blas,cblas,atlas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
accelerate_info:
libraries accelerate not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
Library accelerate was not found. Ignoring
libraries veclib not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
Library veclib was not found. Ignoring
FOUND:
extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
FOUND:
extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
non-existing path in 'numpy/distutils': 'site.cfg'
lapack_opt_info:
lapack_mkl_info:
libraries mkl_rt not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
openblas_lapack_info:
libraries openblas not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
openblas_clapack_info:
libraries openblas,lapack not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
flame_info:
libraries flame not found in ['/Library/Frameworks/Python.framework/Versions/3.11/lib', '/usr/local/lib', '/usr/lib']
NOT AVAILABLE
atlas_3_10_threads_info:
Setting PTATLAS=ATLAS
libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries tatlas,tatlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries lapack_atlas not found in /usr/local/lib
libraries tatlas,tatlas not found in /usr/local/lib
libraries lapack_atlas not found in /usr/lib
libraries tatlas,tatlas not found in /usr/lib
<class 'numpy.distutils.system_info.atlas_3_10_threads_info'>
NOT AVAILABLE
atlas_3_10_info:
libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries satlas,satlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries lapack_atlas not found in /usr/local/lib
libraries satlas,satlas not found in /usr/local/lib
libraries lapack_atlas not found in /usr/lib
libraries satlas,satlas not found in /usr/lib
<class 'numpy.distutils.system_info.atlas_3_10_info'>
NOT AVAILABLE
atlas_threads_info:
Setting PTATLAS=ATLAS
libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries ptf77blas,ptcblas,atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries lapack_atlas not found in /usr/local/lib
libraries ptf77blas,ptcblas,atlas not found in /usr/local/lib
libraries lapack_atlas not found in /usr/lib
libraries ptf77blas,ptcblas,atlas not found in /usr/lib
<class 'numpy.distutils.system_info.atlas_threads_info'>
NOT AVAILABLE
atlas_info:
libraries lapack_atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries f77blas,cblas,atlas not found in /Library/Frameworks/Python.framework/Versions/3.11/lib
libraries lapack_atlas not found in /usr/local/lib
libraries f77blas,cblas,atlas not found in /usr/local/lib
libraries lapack_atlas not found in /usr/lib
libraries f77blas,cblas,atlas not found in /usr/lib
<class 'numpy.distutils.system_info.atlas_info'>
NOT AVAILABLE
FOUND:
extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers']
extra_link_args = ['-Wl,-framework', '-Wl,Accelerate']
define_macros = [('NO_ATLAS_INFO', 3), ('HAVE_CBLAS', None)]
/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-build-env-a3z4ds76/overlay/lib/python3.11/site-packages/setuptools/_distutils/dist.py:275: UserWarning: Unknown distribution option: 'define_macros'
warnings.warn(msg)
running bdist_wheel
running build
running config_cc
unifing config_cc, config, build_clib, build_ext, build commands --compiler options
running config_fc
unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options
running build_src
build_src
building py_modules sources
building library "npymath" sources
adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath' to include_dirs.
None - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_internal.h']
building library "npysort" sources
adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common' to include_dirs.
None - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_sort.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_partition.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_binsearch.h']
building library "npyrandom" sources
building extension "numpy.core._multiarray_tests" sources
building extension "numpy.core._multiarray_umath" sources
adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath' to include_dirs.
adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath' to include_dirs.
adding 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common' to include_dirs.
numpy.core - nothing done with h_files = ['build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/funcs.inc', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/simd.inc', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/loops.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/matmul.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/clip.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_internal.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/templ_common.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/config.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/_numpyconfig.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h', 'build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__ufunc_api.h']
building extension "numpy.core._umath_tests" sources
building extension "numpy.core._rational_tests" sources
building extension "numpy.core._struct_ufunc_tests" sources
building extension "numpy.core._operand_flag_tests" sources
… … …
compile options: '-Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
clang: numpy/core/src/npymath/npy_math.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/ieee754.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_complex.c
clang: numpy/core/src/npymath/halffloat.c
xcrun: adding 4 object files to build/temp.macosx-10.9-universal2-3.11/libnpymath.a
warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpymath.a will be fat and ar(1) will not be able to operate on it
ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpymath.a
building 'npysort' library
compiling C sources
C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort
compile options: '-Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/mergesort.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/quicksort.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/heapsort.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/radixsort.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/timsort.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/binsearch.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npysort/selection.c
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
22 warnings generated.
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
numpy/core/src/npysort/selection.c.src:328:9: warning: code will never be executed [-Wunreachable-code]
npy_intp k;
^~~~~~~~~~~
numpy/core/src/npysort/selection.c.src:326:14: note: silence by adding parentheses to mark code as explicitly dead
else if (0 && kth == num - 1) {
^
/* DISABLES CODE */ ( )
22 warnings generated.
xcrun: adding 7 object files to build/temp.macosx-10.9-universal2-3.11/libnpysort.a
warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpysort.a will be fat and ar(1) will not be able to operate on it
ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpysort.a
building 'npyrandom' library
compiling C sources
C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
creating build/temp.macosx-10.9-universal2-3.11/numpy/random
creating build/temp.macosx-10.9-universal2-3.11/numpy/random/src
creating build/temp.macosx-10.9-universal2-3.11/numpy/random/src/distributions
compile options: '-Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
clang: numpy/random/src/distributions/logfactorial.c
clang: numpy/random/src/distributions/distributions.c
clang: numpy/random/src/distributions/random_mvhg_count.c
clang: numpy/random/src/distributions/random_mvhg_marginals.c
clang: numpy/random/src/distributions/random_hypergeometric.c
xcrun: adding 5 object files to build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a
warning: /Library/Developer/CommandLineTools/usr/bin/ranlib: archive library: build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a will be fat and ar(1) will not be able to operate on it
ranlib:@ build/temp.macosx-10.9-universal2-3.11/libnpyrandom.a
running build_ext
customize UnixCCompiler
customize UnixCCompiler using new_build_ext
building 'numpy.core._multiarray_tests' extension
compiling C sources
C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray
creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/common
compile options: '-DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/_multiarray_tests.c
clang: numpy/core/src/common/mem_overlap.c
clang -bundle -undefined dynamic_lookup -arch arm64 -arch x86_64 -g build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/_multiarray_tests.o build/temp.macosx-10.9-universal2-3.11/numpy/core/src/common/mem_overlap.o -Lbuild/temp.macosx-10.9-universal2-3.11 -lnpymath -o build/lib.macosx-10.9-universal2-3.11/numpy/core/_multiarray_tests.cpython-311-darwin.so
building 'numpy.core._multiarray_umath' extension
compiling C sources
C compiler: clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g
creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/multiarray
creating build/temp.macosx-10.9-universal2-3.11/numpy/core/src/umath
creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath
creating build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/common
creating build/temp.macosx-10.9-universal2-3.11/private
creating build/temp.macosx-10.9-universal2-3.11/private/var
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils
creating build/temp.macosx-10.9-universal2-3.11/private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src
compile options: '-DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -DNO_ATLAS_INFO=3 -DHAVE_CBLAS -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/umath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c'
extra options: '-msse3 -I/System/Library/Frameworks/vecLib.framework/Headers'
clang: numpy/core/src/multiarray/alloc.c
clang: numpy/core/src/multiarray/array_assign_scalar.c
clang: numpy/core/src/multiarray/common.c
clang: numpy/core/src/multiarray/buffer.c
clang: numpy/core/src/multiarray/datetime_strings.c
clang: numpy/core/src/multiarray/conversion_utils.c
clang: numpy/core/src/multiarray/descriptor.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/einsum.c
numpy/core/src/multiarray/einsum.c.src:2158:32: warning: unknown warning group '-Wmaybe-uninitialized', ignored [-Wunknown-warning-option]
#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
^
clang: numpy/core/src/multiarray/arrayobject.c
clang: numpy/core/src/multiarray/array_assign_array.c
clang: numpy/core/src/multiarray/ctors.c
clang: numpy/core/src/multiarray/convert.c
clang: numpy/core/src/multiarray/datetime_busday.c
clang: numpy/core/src/multiarray/calculation.c
clang: numpy/core/src/multiarray/arrayfunction_override.c
clang: numpy/core/src/multiarray/convert_datatype.c
clang: numpy/core/src/multiarray/dragon4.c
clang: numpy/core/src/multiarray/hashdescr.c
clang: numpy/core/src/multiarray/datetime_busdaycal.c
clang: numpy/core/src/multiarray/compiled_base.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/arraytypes.c
clang: numpy/core/src/multiarray/item_selection.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/lowlevel_strided_loops.c
clang: numpy/core/src/multiarray/multiarraymodule.c
clang: numpy/core/src/multiarray/datetime.c
clang: numpy/core/src/multiarray/dtype_transfer.c
clang: numpy/core/src/multiarray/nditer_constr.c
1 warning generated.
clang: numpy/core/src/multiarray/iterators.c
clang: numpy/core/src/multiarray/refcount.c
numpy/core/src/multiarray/einsum.c.src:2158:32: warning: unknown warning group '-Wmaybe-uninitialized', ignored [-Wunknown-warning-option]
#pragma GCC diagnostic ignored "-Wmaybe-uninitialized"
^
clang: numpy/core/src/multiarray/scalarapi.c
clang: numpy/core/src/multiarray/sequence.c
numpy/core/src/multiarray/scalarapi.c:759:38: warning: 'ob_shash' is deprecated [-Wdeprecated-declarations]
((PyStringObject *)obj)->ob_shash = -1;
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/cpython/bytesobject.h:7:5: note: 'ob_shash' has been explicitly marked deprecated here
Py_DEPRECATED(3.11) Py_hash_t ob_shash;
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyport.h:336:54: note: expanded from macro 'Py_DEPRECATED'
#define Py_DEPRECATED(VERSION_UNUSED) __attribute__((__deprecated__))
^
1 warning generated.
clang: numpy/core/src/multiarray/shape.c
numpy/core/src/multiarray/scalarapi.c:759:38: warning: 'ob_shash' is deprecated [-Wdeprecated-declarations]
((PyStringObject *)obj)->ob_shash = -1;
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/cpython/bytesobject.h:7:5: note: 'ob_shash' has been explicitly marked deprecated here
Py_DEPRECATED(3.11) Py_hash_t ob_shash;
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyport.h:336:54: note: expanded from macro 'Py_DEPRECATED'
#define Py_DEPRECATED(VERSION_UNUSED) __attribute__((__deprecated__))
^
1 warning generated.
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.c
clang: numpy/core/src/multiarray/nditer_pywrap.c
numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
int i;
^
numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
int i;
^
numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
int i;
^
numpy/core/src/multiarray/scalartypes.c.src:1880:9: warning: variable 'i' set but not used [-Wunused-but-set-variable]
int i;
^
numpy/core/src/multiarray/scalartypes.c.src:2967:65: error: too few arguments to function call, expected 2, have 1
return _Py_HashDouble((double) PyArrayScalar_VAL(obj, Float));
~~~~~~~~~~~~~~ ^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
numpy/core/src/multiarray/scalartypes.c.src:2976:48: error: too few arguments to function call, expected 2, have 1
PyArrayScalar_VAL(obj, CFloat).real);
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
clang: numpy/core/src/multiarray/temp_elide.c
numpy/core/src/multiarray/scalartypes.c.src:2982:48: error: too few arguments to function call, expected 2, have 1
PyArrayScalar_VAL(obj, CFloat).imag);
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
numpy/core/src/multiarray/scalartypes.c.src:2967:70: error: too few arguments to function call, expected 2, have 1
return _Py_HashDouble((double) PyArrayScalar_VAL(obj, LongDouble));
~~~~~~~~~~~~~~ ^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
numpy/core/src/multiarray/scalartypes.c.src:2976:53: error: too few arguments to function call, expected 2, have 1
PyArrayScalar_VAL(obj, CLongDouble).real);
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
numpy/core/src/multiarray/scalartypes.c.src:2982:53: error: too few arguments to function call, expected 2, have 1
PyArrayScalar_VAL(obj, CLongDouble).imag);
^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
numpy/core/src/multiarray/scalartypes.c.src:2997:75: error: too few arguments to function call, expected 2, have 1
return _Py_HashDouble(npy_half_to_double(PyArrayScalar_VAL(obj, Half)));
~~~~~~~~~~~~~~ ^
/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11/pyhash.h:10:23: note: '_Py_HashDouble' declared here
PyAPI_FUNC(Py_hash_t) _Py_HashDouble(PyObject *, double);
^
4 warnings and 7 errors generated.
clang: numpy/core/src/multiarray/vdot.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/nditer_templ.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/loops.c
clang: numpy/core/src/multiarray/typeinfo.c
clang: numpy/core/src/umath/umathmodule.c
clang: numpy/core/src/multiarray/usertypes.c
clang: numpy/core/src/umath/reduction.c
clang: numpy/core/src/multiarray/number.c
clang: numpy/core/src/umath/ufunc_object.c
clang: numpy/core/src/umath/ufunc_type_resolution.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/ieee754.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath/npy_math_complex.c
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
clang: numpy/core/src/umath/override.c
clang: numpy/core/src/npymath/halffloat.c
clang: numpy/core/src/multiarray/nditer_api.c
1 warning generated.
clang: numpy/core/src/multiarray/flagsobject.c
clang: numpy/core/src/common/array_assign.c
clang: numpy/core/src/npymath/npy_math.c
clang: numpy/core/src/multiarray/getset.c
clang: numpy/core/src/common/mem_overlap.c
clang: numpy/core/src/common/ucsnarrow.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/common/npy_cpu_features.c
clang: numpy/core/src/common/ufunc_override.c
clang: numpy/core/src/umath/extobj.c
clang: /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c
clang: numpy/core/src/common/cblasfuncs.c
In file included from /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c:26:
In file included from numpy/core/include/numpy/arrayobject.h:4:
In file included from numpy/core/include/numpy/ndarrayobject.h:21:
build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h:1463:1: warning: unused function '_import_array' [-Wunused-function]
_import_array(void)
^
clang: numpy/core/src/common/npy_longdouble.c
1 warning generated.
clang: numpy/core/src/common/numpyos.c
In file included from /private/var/folders/k4/y7fdrtfj6d9fvdpvt4rkwgcc0000gn/T/pip-install-nyqmj6ny/numpy_1c4c756b71c748ebb5b03e5cd497f363/numpy/_build_utils/src/apple_sgemv_fix.c:26:
In file included from numpy/core/include/numpy/arrayobject.h:4:
In file included from numpy/core/include/numpy/ndarrayobject.h:21:
build/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy/__multiarray_api.h:1463:1: warning: unused function '_import_array' [-Wunused-function]
_import_array(void)
^
1 warning generated.
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/scalarmath.c
clang: numpy/core/src/common/python_xerbla.c
clang: numpy/core/src/multiarray/mapping.c
clang: numpy/core/src/multiarray/methods.c
3 warnings generated.
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
numpy/core/src/umath/loops.c.src:2611:22: warning: code will never be executed [-Wunreachable-code]
npy_intp n = dimensions[0];
^~~~~~~~~~
numpy/core/src/umath/loops.c.src:2610:29: note: silence by adding parentheses to mark code as explicitly dead
if (IS_BINARY_REDUCE && 0) {
^
/* DISABLES CODE */ ( )
3 warnings generated.
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/matmul.c
clang: build/src.macosx-10.9-universal2-3.11/numpy/core/src/umath/clip.c
error: Command "clang -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -arch arm64 -arch x86_64 -g -DNPY_INTERNAL_BUILD=1 -DHAVE_NPY_CONFIG_H=1 -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -DNO_ATLAS_INFO=3 -DHAVE_CBLAS -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/umath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Inumpy/core/include -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/include/numpy -Inumpy/core/src/common -Inumpy/core/src -Inumpy/core -Inumpy/core/src/npymath -Inumpy/core/src/multiarray -Inumpy/core/src/umath -Inumpy/core/src/npysort -I/Library/Frameworks/Python.framework/Versions/3.11/include/python3.11 -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/common -Ibuild/src.macosx-10.9-universal2-3.11/numpy/core/src/npymath -c build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.c -o build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.o -MMD -MF build/temp.macosx-10.9-universal2-3.11/build/src.macosx-10.9-universal2-3.11/numpy/core/src/multiarray/scalartypes.o.d -msse3 -I/System/Library/Frameworks/vecLib.framework/Headers" failed with exit status 1
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for numpy
Failed to build numpy
ERROR: Could not build wheels for numpy, which is required to install pyproject.toml-based projects
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error
× pip subprocess to install build dependencies did not run successfully. │ exit code: 1 ╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Smth wrong with numpy versioning. Can you try the anaconda(miniconda\ conda forge) environment?
