kimbapslice

I tested Super Road Blaster today on 3 fully working (as far as I can tell) USA snes with configuration 2/1/3 snes (ntsc/usa). I have disabled all in-game menu and...

Ok, so here's an update on further testing. I recently acquired a snes 1chip-01(stock) and 2x snes mini/jr. Both the 1chip-01 and snes mini/jr report 2/1/3 configuration. All are NTSC/USA...

I am experiencing the same issue with the right side of the grid being cut off in all resolutions via hdmi to a 4k lg hd tv. Running this on...

I will check with other tv's and report back.

I tested with a 1080p native Samsung tv today and a 720p native Sylvania, and both in all resolution modes had the right side missing a few pixels just like...

That's great! Thank you!

I will test with a few different memory cards and provide an update soon.

Hello, So today I tested the 1.11.0 release with 2 snes (1chip-01, and not a 1chip), 2 snes jr. All four systems are 2/1/3, running composite video. First tested with...

Wonderful news! The fpga_base.bit did the trick and now firmware 1.11.0 works on all of the 4 snes tested. I was able to run through the entire trailer of Akira,...

Yes, I can do that and report back. Thanks!