killrob

intrested too, is too useful this plugin.

problem here too, with BTT SKR MINI E3V2 AND BTT UPS 24V and BTT TFT35-E3V3.0 in touch mode, i connected the UPS to "pwr-det" on E3 and modified the firmware...

> > >  > > Check this out... > Is this useful?? i will try now commenting the lines you say and let you know quite immediately, just the...

Ok i tried the mods @atharvbadkas told but still don't work, Z is not rising

> > > Try another sd card smaller 8GB FAT32 formatted. Remove everything attached to the mainboard except power. ok i will try, and... you know , in any case,...

> > What makes you believe the bootloader is broken? Start with the most likely and not with the last likely. just because i've done this steps. switch the jumper...

hmmm ok, but if there is a way to correct this with arduino will be better, i'm always ready to learn something new :)

Thank you

> Compiler/IDE used for building is shown as the last item in the [driver overview lists](https://github.com/grblHAL/drivers). Some can also be built using PlatformIO. I have no plans to add Arduino...

@mlauber i solved attaching the SFS directly to monitor not to motherboard. But you have to change the config.ini of the monitor like this: fil_runout:2 fil_runout_inverting:1 fil_noise_threshold:100 fil_runout_distance:7 and disable...