infix
infix copied to clipboard
kernelkit
Linux :yellow_heart: NETCONF = Infix
### Introduction This task defines DHCP server support for setting up a single device with "DHCP IP-per-port" functionality. > This task depends on #703 and #438 ### Prerequisites - #703...
J-O to add description for OSPF-specific complex test. - [ ] Define test case(s) @jovatn - [ ] Review with @mattiaswal - [ ] Add test(s) @mattiaswal + others
Dummy interfaces were introduced in infix-24.10, with limited documentation of it in infix-if-type.yang. When we have a clear use case we ought to add documentation for it.
Pretty simple configuration but can most likely be improved: admin@rpi4:/> configure admin@rpi4:/config/> edit interface wifi0 wifi admin@rpi4:/config/interface/wifi0/wifi/> set country-code SE admin@rpi4:/config/interface/wifi0/wifi/> set band 2.4GHz 5GHz admin@rpi4:/config/interface/wifi0/wifi/> set band 2.4GHz admin@rpi4:/config/interface/wifi0/wifi/>...
### Current Behavior Setting up a container attached to a container bridge causes the [CNI bridge plugin to enable IPv4 forwarding](https://github.com/containernetworking/cni/pull/35/files) (ingress) on *all* interfaces. (See below, *Steps to Reproduce*...
### Current Behavior Got the kernel to hang during boot (on bpi-r3), Possibly there are something in the kernel config that make this make a kernel OOOPS and then reboot....
### Current Behavior The `wpa_supplicant`, enabled by default on RPi builds, is spamming the logs a lot. ``` Oct 8 04:27:44 rpi4 wpa_supplicant[3442]: wifi0: Failed to initiate sched scan Oct...
### Description Infix builds contain a yangdoc.html file in the build tar-ball. It would be nice to have it as an artifact of its own, so that one could like...
### Current Behavior Both documentation and code is wrong. The agreed behavior that when the presence container `wifi` was configured on an interface, without further settings it should start scanning,...