ESP32 requires reset if Wifi intermittent

[kcin-devil]

Issue related to

Sunsynk / mbusd Home Assistant Add-On

Describe the issue/bug

Is there a way to verify the Wifi is connected, and if not either reset the ESP32 or re-initiate the setup loop? I had the ESP32 connected via the 12V outputs on the Inverter, but if for instance it looses connection to the WiFi for whatever reason, I need to reset the ESP32 for it to connect back to WiFi. As a work around I have the ESP32 powered via USB, plugged into a smart plug, if SOC becomes in a state unknown, I power cycle the smart plug, but I would prefer for it to only be connected via the Inverter power supply.

Expected behavior Reset Wifi if disconnected

Your environment

• Home Assistant version: 2024.9.2
• Addon:
  • Name: sunsynk-multi
  • Version: 2023-08-17
• Inverter:
  • Make: Sunsynk
  • Model: 8kW
  • Firmware: __
• Adaptor details:
  • RS485/RS232/solarman
  • RS485/RS232 brand

You configuration

paste config in the block surrounded by 3x backticks

Logs

paste logs in 3x backticks...

[kellerza]

Try the cabled solution :wink:

Can you post your addon config?