Johann Kellerman
Johann Kellerman
> On the topic of custom sensors, how can I get the following MathSensor to work? I'm reading the total for the combined loads minus the total of smart loads,...
Hi, can try the latest edge version? Hopefully this solved it - https://github.com/kellerza/sunsynk/commit/7cbb11c19201cbedd7a35eebbb39f7c9488f85e8
Have a look at this commit https://github.com/kellerza/sunsynk/commit/7cbb11c19201cbedd7a35eebbb39f7c9488f85e8 & especially the test value. I'm sure these used your values. Looking at this now, it might not execute `signed` with 2 registers...
Can you try the latest dev version? https://github.com/kellerza/sunsynk/commit/408482d5d0a0da1bc9c624a4876cd627b0bfa041
Do you have known SOC values? What if you set these via scripts, does it work any better? I've never played around too much with the Solarman dongle... it's no...
I don’t have any suggestion beyond what is documented the callback stats can show improvement/not if you do play around with different schedules all reads all sensors (batch-by-batch) before waiting...
``` [10:59:50] WARNING Use mbusd instead of connecting directly to a serial port [10:59:50] WARNING Try *pymodbus* if your encounter any issues with *umodbus* ```
One with ground is recommended. The switch mode power supplies on the raspberry Pi can cause the ground of the pi to float, which could influence the comms.
Which addon? The dev is probably has the best behavior
Try using the **developer version**, it is more up to date