kdschlosser
Alternative discovery protocol
Every 2 seconds, my Frame TV (LS03, 2018) is sending out a broadcast that looks like this:
{"data":{"v1":{"uri":"http://192.168.1.40:8001/ms/1.0/"},"v2":{"uri":"http://192.168.1.40:8001/api/v2/"}},"remote":"1.0","sid":"uuid:0f459c5c-c976-4275-ab67-d6bbe34ebf42","ttl":8000,"type":"alive"}
UDP, 224.0.0.7 port 8001
googling "samsung 224.0.0.7" led me to this: https://github.com/MultiScreenSDK/sample-soundscape-ios/blob/master/SoundScape/MSF/common/MSFDiscoveryProvider.swift
not sure it's very useful -- use ssdp instead -- but wanted to document it. maybe should use the wiki instead?
it is useful. I am not sure that all TV's support it. I do not believe the legacy TV's support the MultiScreen protocol. But those are far and few between.
I think I am going to go back to the old mechanism of testing to see if the TV is on or and and that is to just keep on looping trying to make a connection. I think the UPNP is kind of flaky in that respect.
The thing is I will not be able to support dynamic addressing if I go that route. which kind of sucks. But it may be the only way to go about detecting the power reliably. I guess I can do that for the legacy TV's and use this broadcast message on the newer TV's that code is copyrighted as of 2014 so we know it will work for 2014 - 2018
My Home assistant Samsung component discover the UE48H6400 on port 8001 but only show when state goes to on. When I turn off TV state remains on.
