kcat

I don't hear anything wrong with the bass in those samples. Though the overall output maybe a little bit quieter in 1.17, for both bass and treble, which if a...

Unfortunately there isn't an easy way to temporarily remove ambisonics. Pairwise mixing is only left as an option for stereo output in the latest git, though even in 1.17.2, the...

Commit a77387b5490e8f40c682118c2a1c192cddc06939 is simply trying to reduce the volume of ambient sounds to better match panned sounds, and so shouldn't affect bass any differently than non-bass. Though the volume calculation...

I figured that may be the case. I suppose just turning up the normal speakers' volume knob (assuming there is one) doesn't get the subwoofer to pick it up? Otherwise,...

> The previous "ALfloat gain = 0.6f / sqrtf((float)Device->NumSpeakers);" change seems to amplify only bass It actually amplifies all frequencies, by about 2.5dB compared to the following commit. Such a...

Commit f5e4a3ed85993f479c6cc1a967d5252378eb5211 adds a `volume-adjust` config option. You can increase the output by editing `%AppData%\alsoft.ini` and add something like: ``` [general] volume-adjust = 6 ``` where `6` is an adjustment...

> It seems like ambisonics is not handling lfe properly, or is mixing it incorrectly, since it only stands out when using a subwoofer. Ambisonics itself isn't concerned with LFE....

Out of curiosity, how is the sub-woofer connected? With my 5.1 speakers, I have 3 3.5mm jack connections (2 channels for each, totaling 6 outputs) that go to the front-right...

OpenAL Soft doesn't synthesize an LFE signal, as it's expected a 5.1 system would have its own crossover stage to feed low frequencies from the 5 channels into the subwoofer....

> when execute the command at a time, how many bytes are captured (what is the nCaptureSize)? Is it related to the parameters of alcCaptureOpenDevice() The `nCaptureSize` value you get...