Ravi Karoria
Ravi Karoria
It looks like the tool table offsets given by G10L10P1Z10 command are not persistent over power cycle while G10L1P1Z10 are persistent over power cycle. Can you check it? Which method...
That's great idea. I will wait for it if you plan to go ahead. Thanks.
My diagram is as per following. DOORT is 24v door sensor which is high when door is open. Secondary side is controller pins. 
Ok. Got it. How about "reset while in motion"? Actually I use Estop, so there is practically no pin having reset function because it is claimed by Estop. The input...
How about implementing it for programs running from SD cards first?
Ok. I am just curious if a macro file should take over just like tc.macro jumps in to do tool change and hands over to running program when done. I...
@terjeio It looks like linuxcnc G33.1 shall be a good go if you are willing to add code for it. I will be more than happy to test it out....
Hi @terjeio, Just had a thought to call a macro when G33 is issued (just like we call tc.macro when M6 is issued). That macro should address the motion of...
I will check it out and report here when I have a working machine with servo spindle motor.