`kcli list vm` not correctly get the IP

[nsu700]

Found the IP is not the correct one for my vSphere VM 924d8-worker-3

[lab-user@bastion-924d8 ~]$ kcli list vm
+------------------+--------+-----------------+------------------------------------+------+---------+
|       Name       | Status |        Ip       |               Source               | Plan | Profile |
+------------------+--------+-----------------+------------------------------------+------+---------+
| 924d8-ctlplane-0 |   up   | 192.168.172.140 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
| 924d8-ctlplane-1 |   up   |  192.168.172.42 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
| 924d8-ctlplane-2 |   up   |  192.168.172.75 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
|  924d8-worker-0  |   up   | 192.168.172.141 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
|  924d8-worker-1  |   up   | 192.168.172.142 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
|  924d8-worker-2  |   up   |  192.168.172.76 | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
|  924d8-worker-3  |   up   |    10.134.2.2   | rhcos-412.86.202306132230-0-vmware | ocp  |  kvirt  |
|  bastion-924d8   |   up   |  192.168.172.10 |                                    |      |         |
+------------------+--------+-----------------+------------------------------------+------+---------+

The worker-3 should be 192.168.172.143, but in the above output, it is 10.134.2.2, seems it just grab the ovn-k8s-mp0 address, but not the br-ex

[core@924d8-worker-3 ~]$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens192: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc mq master ovs-system state UP group default qlen 1000
    link/ether 00:50:56:a2:cb:74 brd ff:ff:ff:ff:ff:ff
3: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether d6:19:3c:18:d3:53 brd ff:ff:ff:ff:ff:ff
4: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000 qdisc noqueue master ovs-system state UNKNOWN group default qlen 1000
    link/ether 96:a6:65:21:a1:18 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::94a6:65ff:fe21:a118/64 scope link
       valid_lft forever preferred_lft forever
5: br-int: <BROADCAST,MULTICAST> mtu 1400 qdisc noop state DOWN group default qlen 1000
    link/ether 6e:8b:55:0d:51:db brd ff:ff:ff:ff:ff:ff
6: ovn-k8s-mp0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1400 qdisc noqueue state UNKNOWN group default qlen 1000
    link/ether 92:db:67:b7:56:81 brd ff:ff:ff:ff:ff:ff
    inet 10.134.2.2/23 brd 10.134.3.255 scope global ovn-k8s-mp0
       valid_lft forever preferred_lft forever
    inet6 fe80::90db:67ff:feb7:5681/64 scope link
       valid_lft forever preferred_lft forever

My environment is:

• Openshift 4.12.26
• OVN network
• vSphere8

Attach my paramfile for reference, the worker-2 and worker-3 were added after OCP provisoned with command kcli scale kube openshift --paramfile parameters.yml -w 4 openshift :

[lab-user@bastion-924d8 ~]$ cat parameters.yml
cluster: 924d8
domain: dynamic.test.home.com
version: stable
tag: '4.12.26'
ctlplanes: 3
workers: 2
memory: 16384
numcpus: 16
network: segment-sandbox-924d8
pool: WorkloadDatastore
api_ip: 192.168.172.201
ingress_ip: 192.168.172.202
service_network_ipv4: 172.30.0.0/16
pull_secret: ./pull-secret.txt