WaterDrop

Note: Documentation presented here refers to WaterDrop 2.x.

WaterDrop 2.x works with Karafka 2.* and aims to either work as a standalone producer or as a part of the Karafka 2.*.

Please refer to this branch and its documentation for details about WaterDrop 1.* usage.

A gem to send messages to Kafka easily with an extra validation layer. It is a part of the Karafka ecosystem.

It:

• Is thread-safe
• Supports sync producing
• Supports async producing
• Supports buffering
• Supports producing messages to multiple clusters
• Supports multiple delivery policies
• Works with Kafka 1.0+ and Ruby 2.7+

Table of contents

• Installation
• Setup
  • WaterDrop configuration options
  • Kafka configuration options
• Usage
  • Basic usage
  • Using WaterDrop across the application and with Ruby on Rails
  • Using WaterDrop with a connection-pool
  • Buffering
    • Using WaterDrop to buffer messages based on the application logic
    • Using WaterDrop with rdkafka buffers to achieve periodic auto-flushing
• Instrumentation
  • Usage statistics
  • Error notifications
  • Datadog and StatsD integration
  • Forking and potential memory problems
• Note on contributions

Installation

Note: If you want to both produce and consume messages, please use Karafka. It integrates WaterDrop automatically.

Add this to your Gemfile:

gem 'waterdrop'

and run

bundle install

Setup

WaterDrop is a complex tool that contains multiple configuration options. To keep everything organized, all the configuration options were divided into two groups:

• WaterDrop options - options directly related to WaterDrop and its components
• Kafka driver options - options related to rdkafka

To apply all those configuration options, you need to create a producer instance and use the #setup method:

producer = WaterDrop::Producer.new

producer.setup do |config|
  config.deliver = true
  config.kafka = {
    'bootstrap.servers': 'localhost:9092',
    'request.required.acks': 1
  }
end

or you can do the same while initializing the producer:

producer = WaterDrop::Producer.new do |config|
  config.deliver = true
  config.kafka = {
    'bootstrap.servers': 'localhost:9092',
    'request.required.acks': 1
  }
end

WaterDrop configuration options

Kafka configuration options

You can create producers with different kafka settings. Documentation of the available configuration options is available on https://github.com/edenhill/librdkafka/blob/master/CONFIGURATION.md.

Usage

Basic usage

To send Kafka messages, just create a producer and use it:

producer = WaterDrop::Producer.new

producer.setup do |config|
  config.kafka = { 'bootstrap.servers': 'localhost:9092' }
end

producer.produce_sync(topic: 'my-topic', payload: 'my message')

# or for async
producer.produce_async(topic: 'my-topic', payload: 'my message')

# or in batches
producer.produce_many_sync(
  [
    { topic: 'my-topic', payload: 'my message'},
    { topic: 'my-topic', payload: 'my message'}
  ]
)

# both sync and async
producer.produce_many_async(
  [
    { topic: 'my-topic', payload: 'my message'},
    { topic: 'my-topic', payload: 'my message'}
  ]
)

# Don't forget to close the producer once you're done to flush the internal buffers, etc
producer.close

Each message that you want to publish, will have its value checked.

Here are all the things you can provide in the message hash:

Keep in mind, that message you want to send should be either binary or stringified (to_s, to_json, etc).

Using WaterDrop across the application and with Ruby on Rails

If you plan to both produce and consume messages using Kafka, you should install and use Karafka. It integrates automatically with Ruby on Rails applications and auto-configures WaterDrop producer to make it accessible via Karafka#producer method.

If you want to only produce messages from within your application, since WaterDrop is thread-safe you can create a single instance in an initializer like so:

KAFKA_PRODUCER = WaterDrop::Producer.new

KAFKA_PRODUCER.setup do |config|
  config.kafka = { 'bootstrap.servers': 'localhost:9092' }
end

# And just dispatch messages
KAFKA_PRODUCER.produce_sync(topic: 'my-topic', payload: 'my message')

Using WaterDrop with a connection-pool

While WaterDrop is thread-safe, there is no problem in using it with a connection pool inside high-intensity applications. The only thing worth keeping in mind, is that WaterDrop instances should be shutdown before the application is closed.

KAFKA_PRODUCERS_CP = ConnectionPool.new do
  WaterDrop::Producer.new do |config|
    config.kafka = { 'bootstrap.servers': 'localhost:9092' }
  end
end

KAFKA_PRODUCERS_CP.with do |producer|
  producer.produce_async(topic: 'my-topic', payload: 'my message')
end

KAFKA_PRODUCERS_CP.shutdown { |producer| producer.close }

Buffering

WaterDrop producers support buffering messages in their internal buffers and on the rdkafka level via queue.buffering.* set of settings.

This means that depending on your use case, you can achieve both granular buffering and flushing control when needed with context awareness and periodic and size-based flushing functionalities.

Using WaterDrop to buffer messages based on the application logic

producer = WaterDrop::Producer.new

producer.setup do |config|
  config.kafka = { 'bootstrap.servers': 'localhost:9092' }
end

# Simulating some events states of a transaction - notice, that the messages will be flushed to
# kafka only upon arrival of the `finished` state.
%w[
  started
  processed
  finished
].each do |state|
  producer.buffer(topic: 'events', payload: state)

  puts "The messages buffer size #{producer.messages.size}"
  producer.flush_sync if state == 'finished'
  puts "The messages buffer size #{producer.messages.size}"
end

producer.close

Using WaterDrop with rdkafka buffers to achieve periodic auto-flushing

producer = WaterDrop::Producer.new

producer.setup do |config|
  config.kafka = {
    'bootstrap.servers': 'localhost:9092',
    # Accumulate messages for at most 10 seconds
    'queue.buffering.max.ms': 10_000
  }
end

# WaterDrop will flush messages minimum once every 10 seconds
30.times do |i|
  producer.produce_async(topic: 'events', payload: i.to_s)
  sleep(1)
end

producer.close

Instrumentation

Each of the producers after the #setup is done, has a custom monitor to which you can subscribe.

producer = WaterDrop::Producer.new

producer.setup do |config|
  config.kafka = { 'bootstrap.servers': 'localhost:9092' }
end

producer.monitor.subscribe('message.produced_async') do |event|
  puts "A message was produced to '#{event[:message][:topic]}' topic!"
end

producer.produce_async(topic: 'events', payload: 'data')

producer.close

See the WaterDrop::Instrumentation::Monitor::EVENTS for the list of all the supported events.

Usage statistics

WaterDrop may be configured to emit internal metrics at a fixed interval by setting the kafka statistics.interval.ms configuration property to a value > 0. Once that is done, emitted statistics are available after subscribing to the statistics.emitted publisher event.

The statistics include all of the metrics from librdkafka (full list here) as well as the diff of those against the previously emitted values.

For several attributes like txmsgs, librdkafka publishes only the totals. In order to make it easier to track the progress (for example number of messages sent between statistics emitted events), WaterDrop diffs all the numeric values against previously available numbers. All of those metrics are available under the same key as the metric but with additional _d postfix:

producer = WaterDrop::Producer.new do |config|
  config.kafka = {
    'bootstrap.servers': 'localhost:9092',
    'statistics.interval.ms': 2_000 # emit statistics every 2 seconds
  }
end

producer.monitor.subscribe('statistics.emitted') do |event|
  sum = event[:statistics]['txmsgs']
  diff = event[:statistics]['txmsgs_d']

  p "Sent messages: #{sum}"
  p "Messages sent from last statistics report: #{diff}"
end

sleep(2)

# Sent messages: 0
# Messages sent from last statistics report: 0

20.times { producer.produce_async(topic: 'events', payload: 'data') }

# Sent messages: 20
# Messages sent from last statistics report: 20

sleep(2)

20.times { producer.produce_async(topic: 'events', payload: 'data') }

# Sent messages: 40
# Messages sent from last statistics report: 20

sleep(2)

# Sent messages: 40
# Messages sent from last statistics report: 0

producer.close

Note: The metrics returned may not be completely consistent between brokers, toppars and totals, due to the internal asynchronous nature of librdkafka. E.g., the top level tx total may be less than the sum of the broker tx values which it represents.

Datadog and StatsD integration

WaterDrop comes with (optional) full Datadog and StatsD integration that you can use. To use it:

# require datadog/statsd and the listener as it is not loaded by default
require 'datadog/statsd'
require 'waterdrop/instrumentation/vendors/datadog/listener'

# initialize your producer with statistics.interval.ms enabled so the metrics are published
producer = WaterDrop::Producer.new do |config|
  config.deliver = true
  config.kafka = {
    'bootstrap.servers': 'localhost:9092',
    'statistics.interval.ms': 1_000
  }
end

# initialize the listener with statsd client
listener = ::WaterDrop::Instrumentation::Vendors::Datadog::Listener.new do |config|
  config.client = Datadog::Statsd.new('localhost', 8125)
  # Publish host as a tag alongside the rest of tags
  config.default_tags = ["host:#{Socket.gethostname}"]
end

# Subscribe with your listener to your producer and you should be ready to go!
producer.monitor.subscribe(listener)

You can also find here a ready to import DataDog dashboard configuration file that you can use to monitor all of your producers.

Error notifications

WaterDrop allows you to listen to all errors that occur while producing messages and in its internal background threads. Things like reconnecting to Kafka upon network errors and others unrelated to publishing messages are all available under error.occurred notification key. You can subscribe to this event to ensure your setup is healthy and without any problems that would otherwise go unnoticed as long as messages are delivered.

producer = WaterDrop::Producer.new do |config|
  # Note invalid connection port...
  config.kafka = { 'bootstrap.servers': 'localhost:9090' }
end

producer.monitor.subscribe('error.occurred') do |event|
  error = event[:error]

  p "WaterDrop error occurred: #{error}"
end

# Run this code without Kafka cluster
loop do
  producer.produce_async(topic: 'events', payload: 'data')

  sleep(1)
end

# After you stop your Kafka cluster, you will see a lot of those:
#
# WaterDrop error occurred: Local: Broker transport failure (transport)
#
# WaterDrop error occurred: Local: Broker transport failure (transport)

Forking and potential memory problems

If you work with forked processes, make sure you don't use the producer before the fork. You can easily configure the producer and then fork and use it.

To tackle this obstacle related to rdkafka, WaterDrop adds finalizer to each of the producers to close the rdkafka client before the Ruby process is shutdown. Due to the nature of the finalizers, this implementation prevents producers from being GCed (except upon VM shutdown) and can cause memory leaks if you don't use persistent/long-lived producers in a long-running process or if you don't use the #close method of a producer when it is no longer needed. Creating a producer instance for each message is anyhow a rather bad idea, so we recommend not to.

Note on contributions

First, thank you for considering contributing to the Karafka ecosystem! It's people like you that make the open source community such a great community!

Each pull request must pass all the RSpec specs, integration tests and meet our quality requirements.

Fork it, update and wait for the Github Actions results.