opendps
opendps copied to clipboard
kanflo
Give your DPS5005 the upgrade it deserves
Hey all, I would love to have my dps8005 supported, i attach the on/off files for 5,10,15V attached to a 20V power source. I would love to understand how the...
I noticed that the power supply values for input, output voltage, and current are very jittery. Was wondering if this was expected behavior. I have attached gifs of the input...
I was wondering if you still have time to maintain this project. There seems to be several forks (@art103, @kohrar ,..) which are moving it forward by it's own way....
my use-case is to have an ESP8266 or equiv be a web REST proxy for this. it would be handy to have some way to display strings to the display...
Hello. It would be really useful, if the OpenDPS would support the DPH5005 this one: https://www.reichelt.de/de/de/dph-labornetzgeraet-0-50-v-0-5-a-joy-it-dph-5005-p263189.html?r=1&gclid=Cj0KCQiA95aRBhCsARIsAC2xvfyekwSnoBKaJY3fs9ofaIt5AFGLL09ytZrKbm74D6tzaN8eVEsh5g0aAvXTEALw_wcB Because it can produce output voltages that are higher than the input voltage.
This would be handy for those of us who only want the merged screen
Is there a possibility to change the display position? Because since I flashed opendps the input voltage and wifi symbol a cut off at the bottom.
The wz5005e shown here with teardown and pics, https://robojax.com/learn/arduino/?vid=robojax_WZ5005E_5A_buck_LCD at the very least looks similiar, but supports the same io (but diff modbus protocol),same specs and damn close model number...
i've seen you closed the issue about that. it seems someone did this already, maybe helpfull? https://github.com/lambcutlet/DPS5005_pyGUI https://github.com/lambcutlet/DPS5005_pyGUI/blob/master/source_files/dps_modbus.py
Hi, Please find a pull request for the following changes: - Apply the LCD freeze workaround to the DPS5020 model. - Reduce jitter by using ADC oversampling
