Kaarel Mänd

I can certainly try to help with this issue, at least for the shale references.

Just for safekeeping in case I disappear again, here's what I have currently written on the shale/mud reference compositions I added in PR #37 (largely based off of Bau et...

Great, thanks! Should I open a PR to add my shale descriptions to the refcomp files?

Thanks for considering this! I've attached five .nxs files from SOLEIL. Two are from the PUMA beamline: the same XAFS file attached above and an XRF mapping .nxs file; and...

No worries at all; that course of action works great for me!

Journalctl shows this when I run ldmc -r /dev/sde1 Jan 11 19:03:13 user-lappy ntfs-3g[10306]: Unmounting /dev/sde1 (user-usb1) Jan 11 19:03:13 user-lappy ntfs-3g[345]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Jan 11 19:03:13...

So I uninstalled the AUR version of ldm, built and installed ldm from github, rebooted, and tried again. Still, there is no luck in unmounting, either with ldmc -r or...

The output of mount is: ``` proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) dev on /dev type devtmpfs (rw,nosuid,relatime,size=1960880k,nr_inodes=490220,mode=755) run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)...

Oh well. Still, thank you very much for going through the trouble of looking at the problem though. I hope that when I eventually reinstall, it will work.

I built it from source now and tried it out, but no luck sadly. But it does behave differently now. - When I plug in a usb stick, it mounts...