k3ng_cw_keyer
k3ng_cw_keyer copied to clipboard
k3ng
K3NG Arduino CW Keyer
Hi, I am going to build a cw keyer and I wish to use I2C display to save pins. I have an I2C lcd adaptor module with PCF8574T chip on...
My hardware has the left paddle connected to pin-IO1 and the right paddle connected to pin-IO0. And it works fine with the 2021.12.17.01 software. Yesterday, I downloaded the new source...
Hello and sorry to me if I disturb, i built yaacw to use it with winkeyer ( https://i1cra.briata.org/yaacwk/ ) the circuit works very well with his ps2 keyboard but does...
With the remaining program memory we have using a Mega 2560 AVR (around 60 % free), and because K3NG is fully modular, it should be possible to integrate FSK support...
I did not find any information about the method to include a different USB keyboard layout. It seems that only Qwerty US is supported. Could someone give me the method...
Each time i try to switch to QRSS mode in CLI, i get a crash and reboot after the watchdog timer. If i disable the avr watchdog function, then the...
Hello, If you try to put FEATURE_BUTTONS, FEATURE_COMMAND_MODE, FEATURE_MEMORIES, FEATURE_POTENTIOMETER and a LCD (FEATURE_DISPLAY), you have not enough space to enter in an arduino nano. So I try to add...
Built and working great , except for 2 issues . 1 from the start, using PS2Keyboard only F1-F3 work , no response from F4 - F12 . Then today while...
This may be of no interest, but as Ive added it I thought it may be useful to others. Its to use a Sitronix ST7032 based LCD (yet another i2c...
In the docs at https://github.com/k3ng/k3ng_cw_keyer/wiki/320-Feature:-Command-Mode it says `'#' Play a memory without transmitting` I actually searched for how to send the character `#` Can i suggest adding (eg. '1' to...
