How to resolve the error when eval mesh?

[YiningPeng]

Great code! But when I generate mesh, I get the following error. I found that when the mesh has holes, a memory explosion occurs or an error is reported as follows. But I'm not sure if this error is caused by an empty mesh. Is there a way for you to solve this problem?

compute data2stl: 67%|###############################################################################3 | 6/9 [00:02<00:01, 1.68it/s]Traceback (most recent call last): File "eval.py", line 193, in accuracy, completeness, overall = run(args, mesh_path) File "eval.py", line 113, in run dist_d2s, idx_d2s = nn_engine.kneighbors(data_in_obs, n_neighbors=1, return_distance=True) File "/mnt/A/hust_pyn/anaconda3/envs/meshtest/lib/python3.6/site-packages/sklearn/neighbors/_base.py", line 670, in kneighbors X = check_array(X, accept_sparse='csr') File "/mnt/A/hust_pyn/anaconda3/envs/meshtest/lib/python3.6/site-packages/sklearn/utils/validation.py", line 63, in inner_f return f(*args, **kwargs) File "/mnt/A/hust_pyn/anaconda3/envs/meshtest/lib/python3.6/site-packages/sklearn/utils/validation.py", line 729, in check_array context)) ValueError: Found array with 0 sample(s) (shape=(0, 3)) while a minimum of 1 is required. compute data2stl: 67%|###############################################################################3 | 6/9 [00:19<00:09, 3.21s/it]

[jzhangbs]

Hi, according to the error message the data_in_obs is empty. It's either because the mesh loading is failed (open3d does not raise exception for this) or the scale is not aligned (e.g. directly evaluate the mesh from NeRF which is still in bbox of size 1)

[rashikshrestha]

Hi, I got the same problem as well. Were you able to solve it @YiningPeng ?

I printed the shapes from data_pcd to data_in_obs:

Data PCD:  (42495, 3)
Data Down:  (1431, 3)
Data In:  (0, 3)
Data OBS:  (0, 3)

This step data_in = data_down[inbound] took out all the points.

What I did:

1. Used the images folder of a scene as the images_dir for COLMAP and create sparse reconstruction (in the from of points3D.bin)
2. Opened points3D.bin via COLMAP GUI and save the pointcloud as PLY
3. Used this PLY file in --data arg of this eval code

@jzhangbs can you help me with this?

[jzhangbs]

Hi @rashikshrestha, seems you are using default setting of COLMAP, which means the camera is different from the ground truth provided by the dataset. You can open your point cloud and ground truth point cloud together in meshlab and see if they are aligned.

[baekhyun77]

Hello, I have also encountered the same problem. I am using the ply file(mesh) generated by NeRF for evaluation. May I ask if there is any solution? Sorry, I did not understand your previous answer

[rashikshrestha]

Hi @baekhyun77 , It is basically the problem of difference in the coordinate system.

In my case, the coordinate system provided by colmap was different than the ground truth. I solved it using the same camera poses as ground truth and triangulation to get point cloud.

In your case, I think it is because, the NeRF normalizes the poses to a unit cube, which gives a different coordinate system than the GT given by DTU. Rescaling the coordinates from the normalized one to GT can solve the problem.

[baekhyun77]

@rashikshrestha Thank you for your answer. How can I normalize the coordinate system and then convert it to the GT coordinate system?I'm sorry, I'm not very familiar with this aspect.

[YiningPeng]

Hi, I got the same problem as well. Were you able to solve it @YiningPeng ?

I printed the shapes from data_pcd to data_in_obs:

Data PCD:  (42495, 3)
Data Down:  (1431, 3)
Data In:  (0, 3)
Data OBS:  (0, 3)

This step data_in = data_down[inbound] took out all the points.

What I did:

1. Used the images folder of a scene as the images_dir for COLMAP and create sparse reconstruction (in the from of points3D.bin)
2. Opened points3D.bin via COLMAP GUI and save the pointcloud as PLY
3. Used this PLY file in --data arg of this eval code

@jzhangbs can you help me with this?

I have solved it. This problem is caused by the GT point cloud and the predicted mesh scale not aligned. The baselines I use are Monosdf and NeuS, and all we need to do is focus on whether we multiply the 'scale' parameter.

[iszihan]

Hi, may I ask how exactly do you scale it to the GT scale? I tried using the bounding box info provided in the DTU dataset but visualizing the point cloud doesn't seem to tell me they are aligned 100%.