New feature, either include IR remote for M5 already or add one in marauder, as well as possibility to attach flippers zero gpio sub ghz attachment or just cc1101

[shanejohn15]

i have my m5stickc plus running marauder 10.8, ive tried so many ways on the m5stack core2 esp32, as well and i can not figure it out the arduino ide way, and im not sure if i was able to flash it through the web updater, or by them5burner because its now listed under m5stickc plus but when i originally flashed it it didnt show up, i waited a day and went to try it agian and it turned on with marauder on it. tbh i wish i knew which way i flashed it so i could do it on the bigger screen and more buttons on my m5stack 2 Aws. the drivers are listed in all the arduino files in the setup.h and config.h files but when i go to compile the sketch it comes back with countless errors with the code. ive tried all the different python/.bat files and they run and pull the correct esp32d0wdq6 v3. if someone can explain what to do for the m5stack with the esp32 in it please and thank you, or since its already written for the m5stickc maybe just change it over im not sure how m5ui works but if we can get it on there thatd be awsome. i really feel like these 2 devices have alot of potential closer to the flipper zero over anything else, if it was possible to get marauder on one of these as well as get the ir remote already made for the m5stickc into the marauder app, and keep databases on the sd card for the m5tack even get the little keyboard attachment for it and that would be a sick/fun little hacking device, especially since theres gpio pins all over it, can ovbiously be connected to the flipper but with an IR remote part of marauder and say something like spectrum analyzer with a cc1101 attached idk just thoughts but i wish i could be more help then just testing the hardware and firmware lol but ive had these m5tack and stickc for about a year now and just finally got something useful out of the m5stickc by getting Marauder working.