stc15clock
stc15clock copied to clipboard
replacement software for cheap chinese DIY led clock based on STC15W404AS MCU
stc15clock
Replacement software for cheap chinese DIY led clock based on STC15W404AS MCU
Building
Compiler of choice is sdcc, avaliable on virually every platform. As my development envirnoment is based on Linux, this is the only OS currently tested.
Simply go into src
directory, run make
and you should get stc15clock.hex
ready to be flashed onto MCU.
Configuration
There are currently two hardware revisions supported, but further compile-time configuration has to be made in src\stc15_display.h
. For display to function correctly you need to specify how common display pin should be driven (LOW or HIGH state).
- rev.A - integrated 4 digit display, without transistors for driving the display -
COMMON_PIN_ACTIVE_STATE = 1
- rev.B - 4 single digits displays, with transistors present -
COMMON_PIN_ACTIVE_STATE = 0
Schematics for both revisions are avaliable in docs
folder.
Flashing
I'm using stcgal
(https://github.com/grigorig/stcgal) for uploading code to the device