UFC Channel Select Encoders

[jrsteensen]

Implement proper push-pull functionality of the UFC Channel Select Encoders.

Requirements

• [ ] 6mm D-Shaft
• [ ] Shaft-less rotary encoder (12PPR with detents)
• [ ] Microswitch (to detect if knob is pulled or not)
• [ ] Detents (to lock shaft in FWD/AFT position and provide resistance.)
• [ ] Do not modify ability to use current encoders (with push switch) (so this becomes a drop in upgrade.)
• [ ] Evaluate if UFC Main Board mod is required, or offer secondary daughter board for them to minimize rework.