OpenHornet
OpenHornet copied to clipboard
F/A-18E BLKIII-type "Single Display" Instrument Panel
This is a placeholder for an option for a "single display" type instrument panel for OpenHornet. This would be based on the F/A-18E Super Hornet Block III Cockpit.
The goal is to enable quick swaps utilizing helios for someone who may frequently fly other aircraft than just hornet in DCS, or a more mechanically simple and less expensive build.
Requirements:
Main Instrument Panel:
- Viewsonic TD2230 Display 21.5" Multi-touch Display (VESA Mounted to MIP) (Original display is HP Compaq L2105tm, but it is obsolete.)
- Left Primary Display Switch Module (LPDSM): 10x Pushbutton
- Right Primary Display Switch Module (RPDSM): 10x Pushbutton
- Bottom Primary Display Switch Module: 2x ON/OFF Sliders, 1x BRT Rocker
- Master Arm Panel: No changes
- L EWI: Add 2x POT (VOL), 2X Encoder with Push (COMM 1/2), Extra Indicators?(?)
- R EWI: Additional Unknown Indicators?
- HUD Panel: DCLTR (ON/OFF/ON), BRT (Pot), DAY/NIGHT (ON/OFF), AOA (POT), ALT (ON/OFF), ATT (ON/OFF/ON)
- Former SPIN Panel: ...(Complete this)
Center Pedestal Panels
Standby Instruments:
- Display is TBD (Possibly can share single display between both?)
- Standby Engine Instrument: 1x Encoder with Press (BINGO), 1x Pushbutton (MODE), 1x Pot (BRT)
- Standby Flight Instrument: 1x Encoder with Push (?), 1x Pushbutton (?)
Panels
- EW Panel: 1x Pushbutton (ECM JETT)
- ECM Panel: JAMMER (ON/OFF/ON), RWR (ON/OFF), DISPENSER (ON/OFF/ON)
- Cabin Pressure Gauge
Right AUX Panel
- Complete this...
https://imgur.com/a/Ke6Gwte#fJBShZ1 (More pictures. Thanks Pilotix01!)