E3V3SE_display_klipper
E3V3SE_display_klipper copied to clipboard
jpcurti
Python based interface for the Creality Ender 3 V3 SE display running Klipper
The screen communication protocol can be extended for response messages from the display unit to the klipper host. Extend rotary button methods already available from klippy so that the screen...
At the moment, the whole action menu is updated every cycle without necessity. This makes the screen flickers and consumes time that will be important when porting this to klipper....
As result from the display interface that this project was ported from, there are a lot of magic number and manual alignment of elements. This doesn't help future implementations that...
Long texts are cut by the limited screen size and it would be nice if they are scrolled when hovered. Applicable on: Print file list (when hovered) , Printing menu...
[A serial bridge was already proposed and implemented ](https://github.com/Klipper3d/klipper/commit/6469418d73be6743a7130b50fdb5a57d311435ca) by @ E4ST2W3ST, but it need to be adapted for the ender 3 v3 se with the following changes: - [Change...
It seems that XY homing on a new print doesn't work after this function runs. The nozzle stays in the center of the bed, and fluidd reports a coordinate out...
