SofleKeyboard

SofleKeyboard copied to clipboard

Proposal: Native RP2040 variant

17

I've built a 2040 based variant, with the working title of "[Sofle Pico](https://github.com/JellyTitan/Sofle-Pico)". I took all the stuff i loved from the previous iterations, and tried to make it easier...

JellyTitan

The hardware is stable after multiple iterations. The QMK PR has been opened: https://github.com/qmk/qmk_firmware/pull/23338 The documentation is mostly done: https://www.soflepico.com/ The VIA PR draft is ready, but the PR can't...

JellyTitan

The Gemfile for the jekyll docs is out of date. When attempting to run locally, it throws errors:  The updated Gemfile bumps the gem github pages to v231 Also...

JellyTitan

Sofle v2.0w, a wireless oriented version of the Sofle v2.0

4

Based on the Sofle v2.0, keeping the original PCB footprint and switch locations **Added** - JST jack for both sides of PCB (JST PH 2.0mm) - Battery toggle switch (Alps...

GarrettFaucher

Sofle Choc ZMK Support

9

Goal: configure ZMK firmware to work with the Sofle Choc Post your progress, findings and ideally a branch of your code even if not fully working

brianlow

SW: Sofle Choc schematic has missing LED connections

1

**Which Board?** Choc **Which Board Revision?** Choc = 2.1 **What Software are you using?** KiCad **What is the issue?** This isn't a software bug per se, but I didn't know...

infused-kim

Missing designators for switch sockets (PG1350) in the Choc version's schematics

1

**Kind of issue?** Assembly **Which Board?** Choc **Which Board Revision?** 2.1 **What steps have you taken** * [x] I have searched the Issues page * [x] I have read the...

pengux

HW: cant find sofle choc top plate svg/dxf

3

**Which Board?** choc **What is the issue?** I'm looking to make a carbon fiber sofle choc top plate and cannot find the sofle choc top plate dxf/svg files, I see...

ripjohnbrown1859

The sofle choc build instructions say: > 2 PCBs. Send the zip from /Gerbers/Choc_v2/choc-v2-gerber-pcb.zip to a PCB fabrication service. The PCB should be 1.6mm thick [though 1.2mm may be better](https://github.com/josefadamcik/SofleKeyboard/issues/136#issuecomment-1045965676)....

SekoiaTree

Can I use the bottom plate from sofle v2 on sofle choc

3

**Kind of issue?** _Bug / Assembly / Software / HELP!_ I need some help. Can I use the bottom plate from sofle v2 (https://github.com/josefadamcik/SofleKeyboard/releases/download/v2.0/v2-gerber-bottom.zip) on sofle choc (https://github.com/josefadamcik/SofleKeyboard/tree/master/Gerbers/Choc) Thanks

jittapont