José Martins comments

Results 47 comments of


                                            José Martins

How to run ubuntu guest + freeRTOS guest on bao?

@ninolomata is looking into this. Hoping to have some news soon.

update: add missing dependencies

Thanks for the PR @JianlongCao. Could you show us where these dependencies come up?

I encountered the following problems when using Raspberry Pi 4b to run bao, and the prompt information printed by the serial port is as follows

@wusnga8dn Can you confirm you followed these instructions: ``` -------------------------------------------------------------------------------- 5) Run u-boot commands Quickly press any key to skip autoboot. If not possibly press ctrl-c until you get the...

I encountered the following problems when using Raspberry Pi 4b to run bao, and the prompt information printed by the serial port is as follows

Btw, if you are using minicom, I've experienced not being able to input any characters. To fix this issue make sure you disable `Hardware and Software Flow Control` in the...

I encountered the following problems when using Raspberry Pi 4b to run bao, and the prompt information printed by the serial port is as follows

@wusnga8dn I believe we've fixed the issues with the raspberry pi boot. Can you please try it out again? (Please note you have to use a fresh clone of the...

I encountered the following problems when using Raspberry Pi 4b to run bao, and the prompt information printed by the serial port is as follows

@wusnga8dn is this particular issue solved? If so, could you share what the problem was?

I encountered the following problems when using Raspberry Pi 4b to run bao, and the prompt information printed by the serial port is as follows

@wusnga8dn @tupelo-shen, sorry for not being able to provide the necessary support. Were you able to overcome this issue? If so could you tell us how? If not, do you...